mrbass Posted January 22, 2013 Report Share Posted January 22, 2013 wondering if anyone making a mold like this? I thought of making a pop mold but not sure those rings would come out. Quote Link to comment Share on other sites More sharing options...
Bassinfool Posted January 22, 2013 Report Share Posted January 22, 2013 To my knowledge there is no one currently making a mold that has the ringed body like on the D bomb so if that is something you really wanted you would have to ask for someone to make a custom mold for you. You could try to make a PoP mold of it but I highly doubt you would be able to get those concentric little rings to come out the way you'd want them to just because the PoP is going to push them together I stead of keeping them spread evenly apart. I wish someone would make a mold for something similar to the D bomb because that thing is a fish catching machine! Quote Link to comment Share on other sites More sharing options...
carolinamike Posted January 22, 2013 Report Share Posted January 22, 2013 Good looking baits Bob! I make a ring worm for a company. The thing about baits with alot of rings is that it turns the mold into a heat sync, but I'm sure you already know that. Quote Link to comment Share on other sites More sharing options...
mark poulson Posted January 23, 2013 Report Share Posted January 23, 2013 Bob, You could try preheating your aluminum molds to prevent rapid cooling of the plastic. 1 Quote Link to comment Share on other sites More sharing options...
ipt Posted January 23, 2013 Report Share Posted January 23, 2013 i dont see why you couldnt make a pop mold out of it, maybe ill pick some up tomorrow and give it a whirl. what is so special about these baits? i watched the video and the action doesn't look too great tbh. Quote Link to comment Share on other sites More sharing options...
Thebassturd Posted February 6, 2017 Report Share Posted February 6, 2017 baitmold.com Avl in stone mold or aluminum! 1 Quote Link to comment Share on other sites More sharing options...
Walking Dead Posted February 6, 2017 Report Share Posted February 6, 2017 On 1/22/2013 at 10:30 PM, ipt said: i dont see why you couldnt make a pop mold out of it, maybe ill pick some up tomorrow and give it a whirl. what is so special about these baits? i watched the video and the action doesn't look too great tbh. I think it is all hype. Their are similar molds that will perform the same purpose: catching fish. Quote Link to comment Share on other sites More sharing options...
FATFLATTIE Posted February 6, 2017 Report Share Posted February 6, 2017 There are exact copy molds on EBay. Both aluminum and some kind of other material. They are kind of expensive but that should be expected with all those thin ribs. They are from baitmold.com (the foreign company). Quote Link to comment Share on other sites More sharing options...
Baitjunkys Posted February 6, 2017 Report Share Posted February 6, 2017 (edited) I made one, It does not hand shoot for crap. Those thin ribs really need the injection machine pressure, If your ok with air pockets in the ribs, then what is available may work for you. The bait molds, does not look like the ribs are as deep as the oem dbomb to me in the pictures. Edited February 6, 2017 by Baitjunkys 1 Quote Link to comment Share on other sites More sharing options...
FATFLATTIE Posted February 8, 2017 Report Share Posted February 8, 2017 On 1/22/2013 at 10:30 PM, ipt said: i dont see why you couldnt make a pop mold out of it, maybe ill pick some up tomorrow and give it a whirl. what is so special about these baits? i watched the video and the action doesn't look too great tbh. I have no idea. I tried them and I was not a fan. Many better beaver bait options if you ask me. Quote Link to comment Share on other sites More sharing options...
mark poulson Posted February 9, 2017 Report Share Posted February 9, 2017 I think it's a combination of how much water it moves, how much air it traps, and how soft it feels in the fish's mouth. On 1/22/2013 at 7:30 PM, ipt said: i dont see why you couldnt make a pop mold out of it, maybe ill pick some up tomorrow and give it a whirl. what is so special about these baits? i watched the video and the action doesn't look too great tbh. I would think the amount of machining involved to make all those rips would be Yuge. I don't think I could make a mold out of pop because the fins are too thin and wavy to hold up to demolding. Quote Link to comment Share on other sites More sharing options...
Flippinstick Mike Posted February 10, 2017 Report Share Posted February 10, 2017 I bought the baitmolds aluminum molds. I warm the molds with a heat gun and I get the plastic a little hotter than usual and have had minimal issues. I did find large glitter gets caught in the thin ribs & creates a pocket or unfilled spot occasionally. Small glitter is better. 1 Quote Link to comment Share on other sites More sharing options...
basscat28 Posted February 15, 2017 Report Share Posted February 15, 2017 I've been pouring with baitmold since as well. Funny you mention a heat gun because that's exactly what I do with the dbomb mold and 3.8 swing impact fat molds. The dbomb is honestly the only beaver I use anymore. 1 Quote Link to comment Share on other sites More sharing options...
TTDuckman Posted February 15, 2017 Report Share Posted February 15, 2017 Do you have a pick of the baits from the 3.8 fat swing? Thank you Quote Link to comment Share on other sites More sharing options...
Cubbie Posted May 10, 2020 Report Share Posted May 10, 2020 Does anyone know if there is anywhere that sells these D'Bomb molds in a larger capacity than 1? I looked on baitmolds and the only one I could find was making them 1 at a time. Any help would be appreciated. Quote Link to comment Share on other sites More sharing options...
Bass-Boys Posted May 10, 2020 Report Share Posted May 10, 2020 I hope you get a reply .. that last post was made Feb. 15th of 2017 Quote Link to comment Share on other sites More sharing options...
bryanmc Posted May 10, 2020 Report Share Posted May 10, 2020 1 hour ago, Cubbie said: Does anyone know if there is anywhere that sells these D'Bomb molds in a larger capacity than 1? I looked on baitmolds and the only one I could find was making them 1 at a time. Any help would be appreciated. Contact baitmolds and ask.... Pretty sure they will do multiple cavities of any of their baits. 1 Quote Link to comment Share on other sites More sharing options...
Cubbie Posted May 10, 2020 Report Share Posted May 10, 2020 1 hour ago, bryanmc said: Contact baitmolds and ask.... Pretty sure they will do multiple cavities of any of their baits. Thanks. I'll try that. Quote Link to comment Share on other sites More sharing options...
STO76 Posted May 15, 2020 Report Share Posted May 15, 2020 (edited) I have the baitmolds aluminum d bomb in 4 cavity. believe it is on page 11 of aluminum molds Edited May 15, 2020 by STO76 Quote Link to comment Share on other sites More sharing options...
Les Young Posted May 16, 2020 Report Share Posted May 16, 2020 (edited) I've fished the d bomb & they catch fish for sure. I fish two different beaver style baits that will hang with the d bomb every time for me & that's the beaver style creature mold from Curt at enforcer or the shz that delmart sold that lurecraft sells now. It may just be a confidence thing, but i'm an extreme stickler about the tails on this type bait because of how i fish them & when fishing them off of deep ledges& drops off of bluffs i want a bait that gets a good vertical fall & these do it best for me. I absolutely love this type of bait. Edited May 17, 2020 by Les Young 1 Quote Link to comment Share on other sites More sharing options...
Cubbie Posted May 19, 2020 Report Share Posted May 19, 2020 I got in touch with bait molds and they can make any size cavity. Thanks for all the info. Quote Link to comment Share on other sites More sharing options...
