A7B28B56-B2AF-4A82-A3C3-695CB567F5EA.jpeg

This is a 7inch without the tail resin jerk bait. The master was carved out of wood then molded in silicon. The curves of this bait have a purpose when it comes to distributing the weight and buoyancy. They also impact the fall on a pause. This was poured with a layer of pure resin, another layer of moderate buoyancy mix of resin/micro balloons and some lead shot in the correct location to cause some shimy as it falls and give some side roll on the jerk

painted with with a yellow and black blotchy base coat to give a faint modeled look. Followed by lime pearl scales. Then a pearl black back and bars. Face is lime pearl and black pearl for gills. Fine gold glitter in first layer of clear coat followed by multiple layers to protect against pike teeth. The tail is held on by a threaded pin made from a large eye screw.