Wiggler

Two more made after an oldtime design , also lathe-turned .

Body length is 3" , through-wired in a slot cut in their bellies .

The wood , that I used , is medium buoyant , the lures have two balance weights fore and aft the belly hook hanger , these are small pieces of roofing lead sheet glued in together with the internal wire form .

Tested them in my bath tub prior to painting , they feature a bit of a "lazier" wiggle , but certainly do work OK .

Also painted with modelmaking enamels , since it would have been too tricky to mask the lip for spraying .

Have also applied some glitter-jelly prior to topcoating them with several layers of epoxy and automotive 2k topgloss .

greetz , diemai