Tennessee Clatter Rig
By JBlaze
- 1,058 views
- View JBlaze's images
Built this one last night. It is a thru wired version in a balsa wood body. Built with .035 spring steel wire, and D2T. I drilled a 3/32 hole from nose to tail. To keep from damaging or splitting the soft balsa body when you spread the wires, I enlarged the tail hole to 1/8 in. and embedded a ½ in. long aluminum rivet in the tail of the bait. I enlarged the hole in the node to 13/64 inch. to accept an aluminum ferrule. The three wires are passed through the rivet and out through the nose of the bait. I then formed a tow eye and placed the blade on it. I secured the three wires to the blade and tow eye with a 1/16 inch aluminum ferrule. Swagging (not sure I spelled that right) the ferrule created some flashing and rough edges. After trimming and smoothing I slid the whole assembly back inside the bait and glued both ends with super glue. As an extra precaution, I also hardened the whole balsa wood body with super glue. The lure is sealed with a thick coat of D2T. Now, if I could just learn to paint LOL.
Recommended Comments
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.