Leaderboard

Hey guys sorry I passed mine on when I went to tube molds but it's quite simple to make google "fabric blades" they are round and somewhere around 2-2 1/2 inches in diameter you alternate blade then a washer to as wide as needed and put them on a small narrow paint roller then just get yourself a plastic cutting board or cutting platform of choice and have at it https://www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwiav4DvlurZAhWXSw0KHY2dBioYABAQGgJxYg&ohost=www.google.com&cid=CAESEeD2QG-ROh0YaAlazdJIUHMm&sig=AOD64_3HF4QilnzEInxGZqG0TBweDlzaSA&ctype=46&q=&ved=0ahUKEwjX6_rulurZAhUtSN8KHQjiD2AQ9aACCOgB&adurl=https://www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwiav4DvlurZAhWXSw0KHY2dBioYABAQGgJxYg&ohost=www.google.com&cid=CAESEeD2QG-ROh0YaAlazdJIUHMm&sig=AOD64_3HF4QilnzEInxGZqG0TBweDlzaSA&ctype=46&q=&ved=0ahUKEwjX6_rulurZAhUtSN8KHQjiD2AQ9aACCOgB&adurl=https://www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwiav4DvlurZAhWXSw0KHY2dBioYABAOGgJxYg&ohost=www.google.com&cid=CAESEeD2QG-ROh0YaAlazdJIUHMm&sig=AOD64_1RaHAVyai7ia4DkrRFXYTeZJsjAA&ctype=5&q=&ved=0ahUKEwjX6_rulurZAhUtSN8KHQjiD2AQ9aACCOEB&adurl=https://www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwiav4DvlurZAhWXSw0KHY2dBioYABAOGgJxYg&ohost=www.google.com&cid=CAESEeD2QG-ROh0YaAlazdJIUHMm&sig=AOD64_1RaHAVyai7ia4DkrRFXYTeZJsjAA&ctype=5&q=&ved=0ahUKEwjX6_rulurZAhUtSN8KHQjiD2AQ9aACCOEB&adurl=

I have been playing with Fusion 360 for a bit and have designed a few lure bodies with the program. I have seen some cool templates printed with a 3D printer, thought I would give it a try. These are for an undefined pumpkinseed pattern. Link to gallery image: http://www.tackleunderground.com/community/gallery/image/17764-crankbait-templates/

A nice blast from the past.

You might want to try LureWorks Violet 193. It is a strong Purple that has a blue-ish undertone that your looking for. It is has a thermocromatic characteristic when hot; it will take on a pink or red shade. Let the bait fully cool before rendering a judgement on how it looks or finalizing your formulation. It is a good alternative to the Junebug 125 that is no longer available. A single colorant is usually preferable to having to mix multiple colorants.

smaller rubber bands

Here is the Redg8R original video:

This one was done with a Pearl white base coat (all paints were very thinly applied). All paints are Createx brand. wash with black and wipe off (highlights scale pattern) P white Below lat: BG 1 (one drop P blue, 5 drops P white) On lat line: I yellow Just above: I green Top, socket: Wicked gold stripe stencil: edge with reduced Transparent black Top, socket, tone: T olive Back, socket: touch of T black Lobe: T black mask bottom belly to under gills: Flo sunburst - very little unmask Touch up gill cover : BG1 Touch up belly: P white

Is this what you are talking about?

My Dels mold (Same as Senko) four heaping are 11g. I forgot to mention heaping LOL

Probably depends on the mold. That formula in a do-it essential series 5" senko comes out right at 10g for me.

I keep a gallon of worm oil on hand for this & packaging of baits too.I also keep a seperate bottle with a yorker style cap with worm oil from the gallon jug that i use just for oiling the injector because there will be small peices of plastic & flake come out sometimes after oiling. When my injector starts to tighten up i pop the end off & pour some down it with the piston pulled down about an inch & pull plunger all the way to where it would be when full of plastic & then reinstall end & squirt it back into the bottle. Works great.

Nice write up. If you check out www.wtp-inc.com you'll find that many of those same holo tape patterns are available in a stick on tape.