Leaderboard
Popular Content
Showing content with the highest reputation on 12/01/2022 in all areas
-
Here are some of my old rattle cans paintjobs. I think I might need to go back, I suck at airbrushing
3 points -
Yes, this is pretty common. At least for me it is. I'm sure others do it as well. After dipping I space them out on a piece of stiff wire. I have hooks hanging in my oven and the wire just rests on that while they cure.2 points
-
Just a word of caution when adding pigment. Do so just a little at a time. Its been my experience that you only need a little. Its also been my experience that the epoxy doesn't set up right if there is too much pigment.2 points
-
I just started making inline spinners and I thought that this would be a cheaper option. thanks!1 point
-
If you're using MF super soft, my guess is it's way too soft for a swimbait. Seems to me most of the swimbaits I use are made with regular or even the tougher plastics.1 point
-
Thank you guys. I will give these a try.1 point
-
I like the VMC 7250 black nickel spinnerbait hook. I had the same problem with the Gamakatsu 550, the cutting point was producing a larger hole in the mouth of the fish. This was causing me a lot of lost fish. The 7250 is a strong sharp hook that holds, they should fit the bill for you. https://barlowstackle.com/VMC-7250-BN-Spinner-Bait-Hooks-P3783/?afmc=ks1 point
-
Just showing all of the hook sizes in comparison....1 point
-
The magnets are working……so far. The hook moves freely, the magnets are in the bottom of the slot. when you retrieve it, the nose rises and the hooks drop. Just a proto plan on making something larger and more detailed.
1 point
