Leaderboard

Nanometers.... It's how the wavelength of the light is measured.

Easy way to figure if you have the wrong light....put it out in the direct sun for 10 minutes.

What's shaking Flashy? Seems that either you have a bad/expired batch of uv resin, or your light source is not generating a sufficient amount of the wave length needed to cure the resin you are using. Take some of your tacky baits and hang them outside in the sun for a while and give them a turn at some point. If after an hour or 2, or so, they are cured and no longer tacky then the problem is likely the light source. If after the sun exposure they are still tacky it's likely the resin itself is no bueno. Let us know what happens. Good luck.

Tacky means it is NOT Fully cured. So more time under the light and closer to the resin will help dramatically Unless you are going for a light matte finish, then just put on a glove and run over the tacky resin then fully cure before it has time to gloss over.

I don’t know how big a area you need to cover but if you brush on a little clear hard as nails finger nail top coat it will take care of that tacky feeling..Nathan

Wow..those videos are a blast from the past..That is one of many TU get togethers at my house.So much amazing information shared and friendships made at those. I think this is the year Phil from England and Pete from Australia attended..Nathan