Jig Man
-
Posts
1,998 -
Joined
-
Last visited
-
Days Won
71
Content Type
Profiles
Articles
TU Classifieds
Glossary
Website Links
Forums
Gallery
Store
Everything posted by Jig Man
-
Nice video. You might want to get some Frankfort Arsenal drop out spray. You can treat the whole mold instead of using the candle and it will last for a long time.
-
Me neither.
-
I have been using Calhoun M but ordered a 5 gal pail from Bait Junkies. Can I mix them together or just use up the Calhoun's and get new gallon jugs?
-
Thanks Curt. Great job as always.
-
When I get paint in the eyelet I use my Popsnagger to clean the paint out.
-
Delmart Handpour 5" Stick Mold Denting
Jig Man replied to Pure Action Baits's topic in Soft Plastics
The copper coupler works well. Be sure to buy at least 10 because those little suckers get very hot. -
I modify my molds without using a dremel tool. I am leaving this am on a 2 week fishing trip but will be glad to discuss it with you when I get back home. If you are interested send me a pm.
-
Sorry, I was brain dead and didn't see it in the thread topic.
-
Whose mold are you talking about? I have Bear's tube molds and they shoot great.
-
I use 90# sevelon or surflon coated cable.
-
On Table Rock, Stockton, and Pomme de Terre, white with a bit of chartreuse or red along with a Zoom swimming chunk have been the best for me.
-
I have his # now. 417-631-9978
-
I use a divided pyrex cup for swirls.
-
Dale Greist at Nixa Mo does my rod work. I don't have his number right now but I can get it if you are interested.
-
I used to use cattle catheter injectors. I modified them to fit my home made molds. They worked but were not safe to use very long.
-
Pour Into A Aluminum Mold (Not Injected)
Jig Man replied to Ultimate Predators's topic in Soft Plastics
Even pouring a worm I use spru extenders. -
I do in the winter but my garage isn't air conditioned so they don't need it in summer at my place.
-
Thanks but I have already ordered 100 #2 so I think I'll be good for a long time.
-
CLR might help with the rust. Acetone is my go to cleaner for anything that won't melt.
-
Thanks fellows. I thought the 2 might be a better size but wanted to check before ordering.
-
I am looking for some ball bearing swivels and some are for sale on this site. They are #2 and #3. Which size would be the best for tandem spinnerbaits. My brain is on vacation and I feel that they may be too small but can't really decide. So Cadman or smalljaw I know you guys will have the answer if some of the others don't. Thanks in advance.
-
I have a guy who helps me pour and that has really speeded up things and made the job easier.
-
My large swing jig mold only goes to 1 1/4. You could get one of them and drill out the cavities to make them the way you want.
-
I have tube molds and don't use salt when I pour. Some of mine float and some don't. I have no idea why. I use Calhoun's medium plastisol.
-
I use JB weld. I fill the cavity then start drilling and pouring until I get what I want. If I go too deep, I put JB back in the cavity and start drilling again. I have one mold that has poured several thousand heads and the JB is still holding on.
