JPC

If you have an air source, you can make your own fluid bed. I used PVC pipe, pipe fittings and a nylon reducing bushing , all purchased at the hardware store. The critical part is the porous polyethylene that acts as the bottom of the powder chamber and top of the air chamber. I found the stuff at www.smallparts.com. I used the .125 thickness. A 9.5" X 9.5" sheet costs $24.00. I used 2" pipe and dip one jig at a time. Use 4" pipe and dip several. A control valve on the air line allows for the release of the very small amount of air needed.