KcDano
-
Posts
849 -
Joined
-
Last visited
Content Type
Profiles
Articles
TU Classifieds
Glossary
Website Links
Forums
Gallery
Store
Everything posted by KcDano
-
Thanks! Lapala
-
Lapala, I am interested in knowing more about the urethane primer. If you could be so kind to impart a little more info regarding the primer you are using. I have been hesitant to use any of the 2-part primers because of waste and clean-up associated with them. Since you mention dipping, is this accomplished without reduction or thinning? Do you know if what you are using is available in the U.S. or if there is a similar product? Thanks Again
-
Lapala is that urethane primer a 2-part?
-
There is a brand name "Autobody Masters" sold by many parts suppliers. I don't believe it is nitro, Acrylic. I think most of the paint jobbers still sell lacquer primer. Dupont sells lacquer primer under the Nason brand.
-
Pikie in Gold Dace -
Cast with Alumilite -
Fire Perch pattern -
Cast using Alumilite resin; Tiger Salamander pattern -
Hand made Balsa Bait -
Small Bomber Repainted -
Refinished Creek Chub Jtd. Pikie -
Refinished Heddon Crab Wiggler -
Large and small refinished South Bend Pike-Orenos -
Congratulations John and Jeff!
-
Yes, you can shoot lacquer primer over the poly by applying light coats. For spot repair or a hole you can use lacquer spot and glazing putty.
-
Good deal! Glad to see it up a running again!
-
RangerZ: It doesn't take long once you have the componets ready some where around 5 minutes, I really don't know. I originally was going to use a reloading press and a sage to produce the actual weight to insert in the case. With a reloading tools you could make them quick! With a modifyed swage you could make a lead slug that would be the correct diameter, using the press to seat the lead in the case.
-
That craw rocks, nice job!
-
Cheesehead, Funny Stuff!
-
Thanks Shawn, standard velocity and magnum series
-
Something I have been tinkering with, in regards to cartridge brass and rattles. I have taken .357 mag and 38 caliber brass to make a combo belly weight and rattle. With the primer knocked out of the case you can solder your brass hanger in the case, fill the case with lead for ballast and add a few bb's for rattle or add a round peice of lead of desired weight for the particular bait and the entire weight is used for an LOUD rattle.
-
.
-
Netting over white base, scales shot with green, squirt the spots and dots with the netting on.
-
Super Job Charlie! Between the indoctrination Coley gave me on mold making and your fine tutorial I might be able to pull it off!
-
I had a great time! Nathan and Debbie did a bang-up job again this year. Thank You, for the second to none hospitality you two offer up. Plenty of fine food provided and expertly prepared by; Coley, Charlie, Nathan, and Debbie, Thank You! Really good to see everyone again this year, and add a new face to the gang. Welcome aboard CrawChuck! Made off with some fine baits, Fat Frog Mold and a pile of memories this year. Thanks to everybody involved, I had a wonderful time! Can't wait until our next rendezvous. Dan