Munkin
-
Posts
710 -
Joined
-
Last visited
-
Days Won
18
Content Type
Profiles
Articles
TU Classifieds
Glossary
Website Links
Forums
Gallery
Store
Everything posted by Munkin
-
You can design something in 3d modeling programs. Blender is free but not easy to use (at least for me). Once you create something send it to Bobby and he can create a mold for you. Allen
-
Hagensfish, Worth, Lakeland all should have them in bulk. Allen
-
I have one and its decent for a lot of painting. Most of the time I just use it for base coats of white. Allen
-
Think its a custom spincast head of his. Allen
-
Mustang wire if you want bulk. Allen
-
Anyone know where I can get some 1/8 hollow black beads? I tried the usual places. Allen
-
-
I will send another email to Ohare since I never heard back. Mark at Mustang said he will not make them. Tried hand bending some and it was a complete failure. Allen
-
You checked with Mark at Mustang wire? Mustang Wire Products, Inc. - Home Page Allen
-
This is how I do it as well with hollow beads and leader sleeves. I will not use a plastic bead for metal to rotate on as it just is a bad idea. Allen
-
I saw some in the Shorty's catalog they just sent me. Allen
-
You going catfishing? Allen
-
Let me know if you figure it out? I tried several different ways and most are failures. Allen
-
Looking for the wire like on this bait. Allen
-
Anyone know of any wire manufacturers besides Mustang? Allen
-
Eye is just a little too big to fit the mold with the the 5/0. You could easily modify it though if you want to use that hook. Yes that is a VMC hook (have to find the pack to see what model number) which I like better than the Mustad 91768. The VMC runs larger in these hooks as a size 1/0 is the same size or slightly bigger than the Mustad 2/0. Another thing is the gap is not as wide but these work really well for weighted swimbait hooks. Allen
-
The 32724 5/0 does not fit but the mold could easily be modified to work. The VMC 30 degee 1/0 does fit in the 1/8ozand bigger cavities though if you are looking for another hook. Allen
-
I have that mold and some 5/0 32724's so I can check. Allen
-
Wish I would have seen this earlier as I just ordered $200 worth of stuff. Allen
-
Anyone know where I can get the little wires that Phenix and Picasso use to connect the blades to their chatterbaits? I checked with Mark at Mustang wire and he doesn't have them. Allen
-
There isn't much difference between the two and 97% of people cannot tell them apart. If you just want a few to try I can send you some? I have at least 900 of them right now. Allen
-
Not sure then but I did get some from one of those places? I by mine from Shorty's by the thousands now. Allen
-
Here is a comparison on the two hooks I use the most. Top hook is the EC in 5/0, bottom is the Gamakatsu 345 in 4/0. Gamakatsu has a wider gap and is thicker while the EC is longer. Allen
-
I think I still have some that I bought long ago from someone on here. Let me see if I can find them tomorrow. Allen
