Predator Bass Baits

Mark, What brand name is the Pastel Fixative ?

Peel and stick blanks would not work unless you painted on the dome of the eye because of the sticky backing. Your normal purchased eyes are done the way your doing it but I do not know what they use for the dome.

Thanks Dave, Sorry I did not explain well.

These eyes are now in stock along with the original ones in the first post. quick link to see new pictures. Lure Eyes

bump

Check out this link to see all the lure bodies I can get. unpainted lure bodies

It is 2 7/8 Just like a Rapala DT-16 except plastic instead of balsa. The other is Just like a Rapala DT-10 except for plastic instead of balsa. The jointed bottom left bait is just like a Jackall Aragon MR I have one and the only difference I see is the rear ball/knocker inside The Jackall lure is about 3/16 of a inch further back in the tail and in a smaller confinment being in that possision so the clear bait I have is a tad louder in noize because of this and the rear of the bill going into the bait is about 1/8" wider and the nose of the lure is about 1/16" wider other then that it is identical.

They are Spro BBZ-1 shad 4"

I received a sample of these lure bodies I can purchase. Any interest here for them ? I can get others as well but these were the ones I liked. Many jerkbaits to choose from as well. $1.50 each for small 2nd on right from top and Top water and $1.75 each for the rest.

Getyourfishon, I wanted to make sure you did not miss this seeng the post kind of strayed. I heard that the tail needs to be died If anyone has messed with dies please post.

Mark, I use thinned 2ton for first coat and DN for second coat.

Mark, no difference then a regular paint job on the 4" bbz-1 Here is one that I do, I have also painted the tail and clear coated it on another color. The 8' BBZ is the tail I asked about in another post about painting a soft plastic, I guess the tail needs to be died.

LOL, did it turn the soft plastic hard then as well ?

Anyone figure out what paint is needed to paint soft plastics like a tail from a swimbait ? Or will any paint work as long as you dip the tail in clear plastiso ?

Some guy's have been saying you can print off on computer but can you print small enough ? All my wording is only 3/4" long total

Mark, I did post the link above in my responce Jimmie, I would hope you cannot get in trouble, guy's sign baits, This is just my sig. as I cannot write well.

I am not able to find them on this site, I thought this is were I found them from before so I hope it is OK to post. WTP Inc.

Very Nice. Now were is the line tie ? Behind top/center hook ?

For those asking about signatures I had one of the sponsors WTP-INC make me these peel and stick signatures, Mine because of the long wording is 3/16" tall x 3/4" long Cost was $40 for the plate they need to make and then about $25 for 1000 stickers. Dicknite does not eat these as well.

Snax, I did not have a chance to try. Smallmouth, were do you get watermelon paint ?

Thanks Snax, That sounds easier to mix as I have those colors, I hope it works.

Thanks Guy's for responding. I will try a few of the ideas. I have tried in the past with other greens and black but I have not hit it yet.

How can I get this color Green by mixing colors works as well. Thanks for any replies

I sell Radiant Heat panels that are used for other things and I use one in my box. These are totally safe but not cheap. About $60 shipped but well worth the saftey

Dave, Thanks for your concern. I guess you need to read between the lines . Red is in stock and the other colors have been ordered. At least I am a supporter and doing this as well.