Jump to content

mark poulson

TU Sponsor
 View Profile  See their activity

  • Posts

    14,718

  • Joined

  • Last visited

  • Days Won

    363

 Content Type 

Everything posted by mark poulson

  1. mark poulson
    Dave, Did you have to abandon all those shop tools when you moved?
  2. mark poulson
    Me, too.
  3. mark poulson
    The reason for wanting stock with parallel faces is to make it easier to mark a centerline on lure blanks, and to cut square lip slots. You can make any bait with the tools you already have. I use a bandsaw, oscillating belt sander (https://www.homedepot.com/p/RIDGID-Oscillating-Edge-Belt-Spindle-Sander-EB4424/202459151), and a cordless drill, plus a drill press. I use sanding blocks and files to finish shape my lures. I would stay away from trying to use a router, unless you're really experienced with using one. They can be grabby finger eaters.
  4. mark poulson
    When I have a problem with my painting/topcoat system on a lure, before I add the topcoat, I paint up a sample on a test piece with the same shape as the problem area, and play around with different changes until I find one that works.
  5. mark poulson
    Wouldn't that be considered an invasive species? Hahaha That is a nice looking bait.
  6. mark poulson
    Antioch (94531) is between San Francisco and Sacramento. According to google, it's 575 miles and 9 hours driving time from Blythe.
  7. mark poulson
    Thank Barry. The golden shiner is all your fault! Hahaha
  8. mark poulson
    Two 3 and one half inch square bills.jpg
    The bottom one weighs 17.5 grams.
  9. mark poulson
    Thanks. I do a variation of the same bluegill pattern, because it works, and I know how to do it. I'm no artist, so I use the KISS method. The top one is supposed to be a golden shiner.
  10. mark poulson
    Two 3 and one half inch square bills.jpg
    Thanks. We have bluegill and golden shiners here on the CA Delta, and that's what I was aiming for.
  11. mark poulson
    I have used glass beads, but found they cracked sometimes and cut my line. Don Iovino recommends fire-treated glass beads with brass weights for his Brass and Glass rigs. Maybe they would hold up better.
  12. mark poulson
    I've use artificial wine corks.
  13. mark poulson
    You can use weed wacker filament for weed guards.
  14. mark poulson
    I just posted a picture of two 3 1/2" squarebills I just finished. I've been laid up with bursitis in my left shoulder, so I can't do anything except make baits. I've already reorganized my garage and boat. Twice. Hahaha Here's a link in case the photo doesn't show:
  15. mark poulson
    Two 3 and one half inch square bills.jpg
    These are both made from Azek PVC trimboard. I built them each in three days. I primed them with Rustoleum 2X Paint/Primer, Createx paints and Folk Art metallics for the colors, and two coats of Rustoleum 2X Gloss Acrylic for the top coat. I added clear nail polish over the eyes, and along the belly treble hook's swing path, to cut down on hook rash. The top one is 1" thick, and weighs 20 grams with #2 KVD EWG trebles. The lower one is 3/4" thick, same hooks. They both swim 3-4' deep, and are stable at high speed, with a big X side to side swim. They are flat sided, so there isn't much roll, and I tapered them down from full thickness at the shoulders to 1/2"+- at the belly, to make them more stable at high speed. They have a 3/8" LPO metal rattle in the front part, and a smaller multi-bb rattle farther back, so they make a lot of noise. I built them to fish fast over shallow grass, and along weed lines, and I want to provoke a reaction bite.
  16. mark poulson
    Two 3 and one half inch square bills.jpg
  17. mark poulson
    I would suggest the Iwata Eclipse HP-CS with the .5mm needle conversion kit. I've been using an airbrush for 20 years+-, and I wish I had started with this brush. It's easy to use, shoots most paints with just light thinning (like skim milk), and easy to clean.
  18. mark poulson
    I use clear nail polish to keep my 3D eyes on my swim jigs.
  19. mark poulson

    20201103_075509.jpg

    mark poulson commented on RPM's gallery image in Hard Baits

    20201103_075509.jpg
    Bob, I'm just amazed at how many really nice baits you produce.
  20. mark poulson
    Hoff, Your bait looks interesting. I've laminated PVC decking to PVC trimboard in the past, but, for me, it wasn't worth the effort. I hand shape all my baits, and, even though I get close, they all vary by the time I'm ready to add ballast to them. For smaller cranks, it is possible to repeat a shape well enough to be able to use weighted belly hook hangers to get close, but I have trouble getting bigger baits that close. I've found that I have to play around with my ballast too much after my bait is shaped, depending on the shape, to be able to incorporate the ballast before shaping. Please keep us informed as you build them.
  21. mark poulson
    That is a great question!
  22. mark poulson
    I only tie for myself, so I usually use the same skirt parts that work for me, but, when I want to save a combination, I use my cellphone camera to record my skirt parts, and then save them on my computer.
  23. mark poulson
    I use the thin and the medium. I've never tried the thick. For me, the thin works for attaching eyes to crankbaits, for attaching tight fitting crankbait bills, and for making baking soda filler. It also seals balsa baits really well, and also PVC trimboard baits. The medium works well for anchoring weed guards, and installing crankbait hardware. I use the ZAP accelerant to set the medium, once I have something glued and positioned.
  24. mark poulson
    Here's their home page: https://www.zapglue.com/ I usually buy it off of Amazon.
  25. mark poulson
    I do use those, too, but I like the 2 or 4 oz. bottles because I use it a lot in my bait building.
×
×
  • Create New...
Top