BassnRandy

4 0z. plastic 4 drops L.c. watermelon 4 drops M.F. watermelon Brown 1 dash Dels Fuscia .035 1 dash chart .015 This is pretty close. My customers like it alot.

Thanks!

I have seen about ten variations on this color from some that look like morning dawn to blue purple. Any one have the standard recipe? I have only seen pictures. Had some requests as of late for it. On guy said his was a translucent yellow with blue pearl in it. I am lost on this one. Randy

Anybody have a recipe for Yums Ozark Smoke. Can't find a decent picture or any baits locally. Would appreciate some help! Randy

I sold about 4000 gobies last year. Overwelming color was green pumpkin. We were on Little Sturgeon Bay Sunday and caught about 100 smallies in 4 hours. 2 colors M.F. Motoroil with gold and purple flake and green pumpkin purple flake. All the gobies have some purple or blue tint to them. They change colors just like everything else however to match their surroundings. Your basic greens and browns work just fine. Put a pearl blue belly on and your even better.

Awsome. Where do you get the resin from?

I know this was brought up before but i could not find it doing searches. I have some new silicone molds from L.C andthey put the dull white film (finish) on the baits. What do you do to clean these molds or make them workable? Sorry again but I couldn't find the thread. Randy

Has anyone tried Bob's 5'' open top swim yet? Curious as to how well it swims. Any replies will be appreciated. Randy

B for sure!

Anybody care to share a goodrecipe for this color?

Email Kim. She is quick to answer. They are making new molds all the time and they don't always get them listed right away.

I have that same trailer mold from L.C. Kim assures me that there is plenty of difference and that the hand poured part alone gives you at least 10% of the difference. personally I don't see how that would make a difference as Zoom is squacking about the design. Have your lawyer ask them if they are so upset why they are not going after Venom's Bully frog or Moon's flash worm which is an L.C. mold of the speed worm. Seems like select and choose dicrimination to me. Things might get worse now as the economy slides. Companies will be very defensive over their share of the market. The companies that survive that is.

Puringto fast can cause this also. I agree with JSC. Try warming your mlds and make sure you pour down the center. Thin steady stream.

Post a picture of the bad worms. Your not really stating the problem. If it's from the plastic shrinking down the hole you have to keep adding till it stops dropping. Bubbles means either your mixing plastic that is a bit thick (cold) or your glitter or salt has moisture in it. Could be other things also. I am sure someone else will chime in.

Here is the out come without salt