hazmail

Jonister, also consider "fuming", this is a process they use to remove layers of paint from old paintings, saw it done years ago when working as a picture framer-- You hang the object on a jar lid and add a small amount of solvent to the jar (attach the lid without the object being immersed in the solvent) until you find the right one to dissolve the top coating, start with turps and work through alcohol, thinners and on to acetone and MEK etc until you find something that will dissolve the coating-- Because it's only fumes attacking the coating and not a liquid, it's pretty mild (and slow). How much time have you got?? I often use this to clean out an air brush overnight---this is good to strip back plastic lures, BUT keep an eye on it. Pete

Sorry Dale, I called it ''gold leaf'', it's metal leaf (silver or gold color)-- Real ''Gold '' would add $25 to the cost of a lure ---- Pete

Here is an example of some silver leaf scales, nearly as good as chrome BUT much more natural flash than chrome-- IMHO. Pete

Like someone mentioned above, you can find anything in the ''archives" on T.U ------------- You just have to look !! http://www.tackleunderground.com/community/topic/13053-polycarbonate-lexan-lip-former/ http://www.tackleunderground.com/community/topic/11740-compound-bending-lexan/ Still using mine . Pete

Mark--I seem to remember Roswell N.M had a past association with a famous UFO incident- Although it was supposed to have happened 2 years before we were born!!!!! Maybe she added some sort of radioactive isotope her dad gave her from this UFO crash---This may explain why it was so hot, AND melted the plastic cup-------------------- Sorry,,,,,I may have started another conspiracy theory here Pete

Me too Ben, been trying heat shrink as a stencil but struggleing to get any wide enough. Pete

Facinating stuff Angus, I saw your blog a few months back and was really impressed, love the shape you have come up with too- Wish I was younger and could get a handle on this I would be all over it. Then again I have so many irons in the fire around here I doubt weather I would ever get the time- I have spent about 18 months making / tweaking that ''copy lathe" and still at it , although it's entirely different I think I know what you must be going through--hang in there mate. Pete

If you are using clear lacquers try mixing in some talc, or just buy some ''Matte Base'' and mix @ apx 30% ( @ 70% lacquer x 30% BASE) --if you do a search, ''matte lacquer'' or ''matt lures'' there should be a mile of info in here. Pete

Well done Mark, as they say, a good day fishin always beats a good day at work. Pete

Just discovered this beaut tute-- an elegant solution Gene and very well presented- Appreciate ALL the time you would have spent on this mate. Thanks --Pete

Yes Mark, whatever you need to know is in here somewhere ----------- although over the years I have found some bits missing . Soak it up mate. Pete

Thanks Ben, I see it all now -- I have always done the opposite and hung the lure off a piece of cotton on the back (stuck on with a apiece of tape) , moving it along until lure hangs level --In the end it's the same result whichever way you go and as we are all saying, a good starting point . Pete

Trying to understand this 'Balance Beam' Ben,, --do you have a slot down the centre of the lure,?,, CONFUSED here. Pete

Yes Dave, between the drill press and band saw I don't know how I coped with it-- I sometimes used my drill press for quite a few years as a lathe, until I finally bought a 'Mini Lathe', and use it about every second day. Pete

Anthony- as Ben says , "super magnets" are the go here, just make sure you water proof them, with magnets, electrolysis is public enemy No1 here - I have been using them (3mm) with my snagless hook setup in salt water and had to seal them off with epoxy to stop any corrosion - fresh water would be less of a problem, but still a problem.. Pete

Craig--could be that you are not allowing enough time for the glue/ glues to dry, a lot of glues shrink as they dry which puts a lot of tension on the material used, OR because it is now sealed with epoxy it is still ''gassing off'' which can cause bubbles to form under a top coat. Everything has to be dry before sealing it up !! Hope this helps. Pete

Rapala and Nilsmaster (both from Finland --I think!!!) , these were my ''mentors'' back in the 70's-80's Tsurikichi - Here the larger Nilsmasters were renowned Barramundi catchers back then, and if you can buy them still are. Although balsa is not real durable, it is quick and easy to shape and allows you to make prototypes easily-- Just remember when you DO graduate to carving harder/ heavier wood, balsa which is also very buoyant generally will give you a lot more and different action than the heavier woods . Enjoy your journey. Pete

Nice Blog Rob. Pete

I have used it on swim baits to 'free them up' a bit, also on twitch style and walk the dog baits, (anything that moves sideways)--as everyone is saying, the probability of cracking the epoxy when tuning is a big possibility. Pete

Yeah mark, I have a shed full of ''intriguing looking'' stuff .. pete

Sorry Bob, just got round to taking some pics. Hope you can figure out how it works. Pete

I use a lot of small lip's and this limits the distance from my hand to the band saw blade, so a few years back I fleaBayed a 'Ticket Punch' which punches a nice slot any length up to about 3/4"' long, nail clippers are also good--- I use 1mm Polycarbonate though (.040 ") Pete

Thanks Dave--I tried to paste that link but it's beyond me, doesn't seem to work like it used to around here - I had the feeling I may have already posted it , but on searching my history I could only go back to October 15th - 2015 ---Pete

Gee -- I reckon I have made or used all of these dust extractors, including the "Thein'' which was pretty good (and simple)----BUT I have used this one for the past 2 years with excellent results, and you can just chuck the wet dust on the garden or compost heap - If you have a fan, very easy to make --- Pete

I reckon I'm with you Dave, well put. Pete