-
Posts
425 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Articles
TU Classifieds
Glossary
Website Links
Forums
Gallery
Store
Posts posted by Bogbaits
-
-
so is it new this year that we can enter multiple lures in one category?I see thats the case in many categories
-
yes its toxic,so is your lacquer thinner,the paint is made with mek,I use it on thousands of lures,be safe,be carefull,that being said as long as you protect your self its all good
- 1
- 1
-
its made with mek
- 1
- 1
-
mek
- 1
-
We tell our customers to rig them sideways,We kill them rigged sideways,talk about dying action!!!try it sometime
- 1
-
You can also demold the bait whie its still cooling
,when I do big pours and am in a hurry this works well,the plastic doesn't have time to dent
-
On 4/17/2017 at 11:32 PM, curt k said:
The posted problem has been resolved . From what I understand the problem is related to a broken thermometer .
I don't think I've ever sent a mold out that was un-vented . I recall you buying a hand pour a few years back but I don't recall you buying the injection curly tad
Bought one on ebay,never said I purchased it from you,ya got that hand pour from you and had to figure out how to get it to work,the one off ebay I had to modify with venting,a lot of molds need to be modified,not just yours,as a lure manufacturer I dont expect all mold makers to get this stuff right,after all Im the one pouring and injecting thousands of lures with different plastisols and different heat ranges,I do what I need to to get them to work for me
-
Ive got that mold and its not vented at all,I even contacted him and he had no answer so I hand poured the mold then flipped it upside down,I have another tadpole mole from him and it also has noventing,ended up injecting it,topping it off then turning that one upside down also,it works,dont like doing it,I suppose I could try cutting some vents in it
-
Lure craft always hard packs,not a problem for me,takes 30 seconds to stir a 5 gallon bucket so no bid deal,worth it to us as it works for our situation better than any other
-
Quick note there are no 3d lure eyes either made in America or in china that will stay on a bait without some kind of help be it glue or clear dipping period!!Don't believe it,though most the American made eyes are far superior for sure its just a small matter of time before they fall off also,I have used super glue,the cheap stuff and it worked fine,we dip ours in clear plastic
-
Also try pouring all the way to the top,let it settle then top it off,wait a little bit till it starts to firm and flip the mold over,this has worked on some of my molds in the past,also experiment with demolding the bait early in the drying process
-
Not trying to start a plastic war by no means,I use Lurecraft ,I use the 500 salt water,i have found in my situation and that's a key word here my situation,All lure makers have several varaibles in how they pour and make theire baits,i use 4 1000 watt mics to make our lures and I have tried all plastisold,I mean all of them and the lurecraft 500 is the only one in my situation that will not yellow and is the most consistant bucket after bucket,it hard packs so I must spend an extra 30 seconds to stir it,no big deal,it is filled with heat stabilizer and all the good stuff that is lacking in most Ive tried,if you want a tough plastic that wont yellow than this is it,treid some of lurecrafts other plastics with mixed results,bottom line is get lots of samples and try everything you can,only then will you really know what works best for you!!
- 1
-
Go to clear bags,you can order as little or as many,cheaper the more you order,I get mine from there ,you will have the up front fee for color plates,I get mine for a round 10 cents each for 5000
- 2
-
We pour thousands of baits for our customers,Ive tried them all!!Lurecraft for us,very high heat resistant,we cook with 4 1000 watt mics set on high and this stuff doesn't yellow,and its tough!!
- 2
-
Do it molds make the 6.75 inch molds that I sell on my site
-
We purchase ours from www.uscomposites.com they also have a lot of other cool stuff you may be interested in,prices are great also,as for who makes it I believe 3m makes the best but a lot of mold makers and lure supply stores sell it,buy in bulk and save big!!!
-
I have tried 3 different versions of this stuff,soft medium and hard and all of it took over 3 weeks for the baits to cure,tacky from the get go,emailed them and they said to add some worm oil to the bait???Not impressed at all,too bad,had a lot of good qhaulies also
-
Just want to comment on this post,I have purchased a lot of molds from mold manufacturer,some commercial molds and some private custom molds,ANlmost every mold I have purchased took some trial and error in pouring a complete perfect bait,mold making is not an exact science,that being said a mold maker is not a lure maker,we are 2 different animals,mold makers in all due respect do not come close to pouring the number of baits that the lure maker pours,And that being said not sure even if the mold maker could pour some of his or hers creation without defects,all the molds Ive purchased needed to be tweaked one way or the other,the mold maker does not have a clue how to make them work for your plastic,heating device etc,Hope this came acrossed the right way,do not want to offend anyone,every mold is different and there are so many variables with plastic and heating devices,SO I THINK WHAT IM SAYINGB IS ITS UP TO YOU LURE MAKERS TO MAKE THEM WORK,POUR POUR AND POUR SOME MORE,THATS THE WAY I LEARNED T GET THEM RIGHT!!!lol
- 1
-
its not that,I have called for the last 2 months,cant even get a call back,I have tried from a dozen computers from different locations keep getting this error
This site can’t provide a secure connectionhookset.com uses an unsupported protocol.
ERR_SSL_VERSION_OR_CIPHER_MISMATCHand this Unsupported protocol
The client and server don't support a common SSL protocol version or cipher suite. This is likely to be caused when the server needs RC4, which is no longer considered secure.- 1
-
Having a problem contacting the hookset.com site,I can go to the site but cant go to the cart or account pages,have emailed them for the last 2 months with no responce,just wondering since they are a sponsor does anyone have any info is the site just having problems or have they folded up?
-
Just wanted to throw this one out there,I use lurecraft plastic and have for the last 10 years,reasons why,I have tried every plastic that is out there and I mean everything,lure craft 60/40 mix works for me as well as the salt water ,I have 5 1000 watt mics going almost everyday and they are set on high,thats it,put in the plastic and go,no stirring inbetween,lurecraft is the only plastic out of all of these that does not yellow or buble under my conditions,everyone one of the others and I do mean everyone of them bubbled and yellowed under my conditions,so it does all depend on how we use the plastic also,I just find lurecraft plastic has more or a better heat stabilizer,i can reheat many many times under these conditions
-
Try this, with cap tight turn them upside down on the cap for a week and they will start to release, do this over and over until you see results. Then you may be able to shake them manually. Are they pints, quarts or what size? A 2 ounce will work the same way. If they are totally dried out then cut the top off use as a paste.
jeff@mf
This will take forever,do the microwave thing,it will be good as new in under 10 minutes,done it several times
- 1
-
Never even needed a nut or worm oil,just get it hot then shake the you know what out of it but if its really old and the seperation has dried the liquid out the ad the worm oil
-
I have several bottles of colorant that was old and settled,put them in the mic for short burst,worked great,seem to thin out the color,heated it up and made it a breeze to mix again,just watch it closely
- 1
How much floater to add to frogs?
in Soft Plastics
Posted
We had a formula 5 heaping tablespoons per8 ounces of plastic,also noticed in my years of using the micro ballons some plastisols dint like the stuff,we used lurecraft hard formula,we tried a lot of other plastisols and the lure would tear and break very easy,A lot of trial and error is need with this stuff depending on wht plastic you use