dblades
-
Posts
21 -
Joined
-
Last visited
Content Type
Profiles
Articles
TU Classifieds
Glossary
Website Links
Forums
Gallery
Store
Everything posted by dblades
-
Haven't found the blade adds any fish over a ball head.
-
So it's a shakey head then.
-
One of my best spawn baits are some twin spin Terminators I got on closeout years ago.
-
Fortunately my custom caster has not had any problems so far and he gets checked regularly. I'm amazed that it is so, since he smokes constantly when working. Being from an area with LOTS of natural lead mines, I think lead gets a bad rap in a lot of cases.
-
I don't think you can pull the knots hard enough the skirt won't spin.
-
Don't a lot of the Megabass baits us a "guanine finish"?
-
You're killing the baits action by using a hook that large.
-
I like the harder metals for spinnerbaits.
-
I may have to break out my "spy" spinnerbaits with black and yellow vinyl skirts. Been hanging in the garage for about 40 years.
-
Wouldn't just the wood density vary more than .010? You can keep the paint and sealer coat within .010? All the hardware used doesn't vary more than .010, when aggregated?
-
Why do you want a flat eye on the ned rig?
-
All my custom spin molded ned heads use a #2 Lil Nasty, anything bigger kills the action IMHO. I also have no head heavier than 3/32, above that I go to a shakey head.
-
I use a 5/0 and like the 1/16 ounce best, however I also use both traditional ball heads. The original ball heads have a different fall if rigged correctly, that works well for suspended fish.
-
This is actually on of the few taxes I don't mind paying, most comes back to sportsmen.
- 31 replies
-
- 2
-
-
- selling lures
- starting up
- (and 1 more)
-
Thinks it more where it became popular, than the actual crawfish color.
-
I've lost enough fish using "cutting point" hooks I'll never have another in the boat.
-
I like the Zurons for oval rings and Texas Tackle for round
-
Loctite gel is what I've been using.
-
Check Amazon, sometime you can get good deals.
-
I use an old spinnerbait head with a very heavy hook, it'll pop the pro-tec right off before you heat cure them.
-
Went fishless one night on Table Rock, fishing all the normal night time colors. Meanwhile my buddy on the back deck has a limit up to five pounds on Tomatoe Salt Craws. He only had six, finally he gave me one, second cast got my line broke.