bhorlings

very interested... pics please.

Thanks!

Does anyone have this mold? I'm curious about it. I'd like to get some samples to test out. If you have the mold, whose injector are your using with it? Please shoot me a PM on it.

Disclaimer: I am posting these molds on two forums. I will sell them in the order I receive responses. 2010.08.06 - Two drop shot molds sold, pointy stick molds are sold 4" Drop Shot Worm - Resin Mold Type: One Sided Material: Resin Manufacturer: IGOTWORMS Condition: Slight Used But In Great Shape Price: $10 OBO Shipping: $2.00 per mold Cavities: 5 Qty: 3 1 Picture: 5" Pointy Tail Stick Mold - All Pointy Tail Molds Are Sold Type: Two Sided Material: Aluminum Manufacturer: Del-Mart Condition: Used But In Great Shape Price: $60 OBO Shipping: $5.00 per mold if sold separately. Free if you buy both molds Cavities: 4 Qty: 2 Notes: I took the screws out of the mold and put pins in the corners for alignment. All you need is a clamp. This makes for faster de-molding. Picture: (Picture is the stock mold picture. I will post actual picture tonight) 2.5" Chunk Trailer Mold Type: Open Pour, One Sided Material: Aluminum Manufacturer: Bearsbaits.com Condition: Used But In Great Shape Price: $25 OBO Shipping: $2.50 per mold if sold separately. Free if you buy both molds Cavities: 5 Qty: 2 Notes: Picture:

It says you cannot receive any new messages. Go ahead and send me an email at brian@bucketmouthfishing.com.

I emptied my message box. Sending reply PM's.

Disclaimer: I am posting these molds on two forums. I will sell them in the order I receive responses. 4" Drop Shot Worm - Resin Mold Type: One Sided Material: Resin Manufacturer: IGOTWORMS Condition: Slight Used But In Great Shape Price: $10 OBO Shipping: $2.00 per mold Cavities: 5 Qty: 3 Picture: 5" Pointy Tail Stick Mold Type: Two Sided Material: Aluminum Manufacturer: Del-Mart Condition: Used But In Great Shape Price: $60 OBO Shipping: $5.00 per mold if sold separately. Free if you buy both molds Cavities: 4 Qty: 2 Notes: I took the screws out of the mold and put pins in the corners for alignment. All you need is a clamp. This makes for faster de-molding. Picture: (Picture is the stock mold picture. I will post actual picture tonight) 2.5" Chunk Trailer Mold Type: Open Pour, One Sided Material: Aluminum Manufacturer: Bearsbaits.com Condition: Used But In Great Shape Price: $25 OBO Shipping: $2.50 per mold if sold separately. Free if you buy both molds Cavities: 5 Qty: 2 Notes: Picture:

PM Sent.

Good to know.... Wait that's today!

When does that go into effect? I just did an add to cart on the site and it still shows $120.

Very easy. Just make sure the molds are warm to avoid cold cracks.

I've poured over 600 of these in the last three weeks. You have to do the following: Pre-Heat the mold until you have to hold it with gloves on Make sure your plastic is upwards of 350 degrees if not a little more. Once you get going you'll be all set.

Where did you get them from? I just want to make sure they are the same as what I have.

Pics please.

Whose stick bait molds are they?

So mad I missed out on that one... I didn't get back to the auction in time before it closed!!!!

Molds are sold.

No lettering. That's just the stock photo from Del's site. I can take pics of the molds to verify if needed. PM Sent.

Del-Mart 10" Curl Tail Molds # of Molds: 4 # of Cavities Per Mold: 2 Mold Type: Aluminum, Open Pour (One Sided) Condition: Used Price: $120 w/ Free Shipping if all molds are bought at once, otherwise $30 w/ free shipping. Picture: (Picture is from Del-mart.com... Not of actual molds)

Sold!

Sold pending payment.

Del-mart 5" Pointy Tail Stick Mold # of Molds: 1 # of Cavitites: 4 Type: 2 Piece - Aluminum Condition: Used Price: $55 OBO Shipping: Free Notes: Mold has some rust on bolts and alignment pins. Picture: (Stock photo... not picture of actual mold).

First of all I would get a web site so people can see your product at any point in time. Then I would hand them out to key people not everyone you see at the dock. Find the most credible (best fishermen) people you know and give them some. All it takes is for them to win a tournament on your baits and people will start looking at you. It's definitely not as simple as that but it works. A few years ago I did the whole hand them out to everyone and their brother and all I did was waste time and plastic. Over the course of a year I poured 5 gallons of plastic for give aways and I got three orders in return. Just my two cents.... Side note... I designed my website and a few others. If you decide you want one let me know and I'd be happy to help.