nugene

thanks reeves....i'll keep looking

go to lowes or home depot and look for pipe repair tape.....it's made by Nashua comes in 2" rolls and has a VERY sticky blue back....works great for me...later

i have a couple sizes of hangers....the one i use mostly is 1/4" center of eye to center of eye.....wire diameter is close to .040 diameter...i would like to find a hanger that is a little longer....maybe 3/8" center to center and same wire size......the ones i've got came from Worth and for that size they have to set up a machine and run them as a special order!!!!cost way to much....can anyone help ??????thanks

Great Job !!!!!!keep It Up

thanks for the help b75nweav

thanks oscarsteel i'm gonna try the soap scruncher also......nugene

thanks 6 feet deep......where do you find it?????i assume it would have the size mesh we would use????? is it poly...cotton ?????

does anyone know of a netting that is more similar to the shape of fish scales other than the hexigon patten ????????thanks

can it be done with lacquer paint??????????thanks

that looks great....especially the bottom one.....how do you do that?????(i mean with lacquer)

thanks creek monster....tell me what you mean "vacuum system".....

thanks KcDano...so how long would you let the lacquer dry and under what condition?

need help AGAIN.... a few weeks ago i asked for help with a problem i'm having with dnite wrinkling paint....parrothead127 was kind enough to offer a solution (thin with ppg dtl 105 @ a rate of 50-50)that really didn't cure my problem....i use lacquer paints....polytranspar and life tone mostly...i use deft sand and sealer and put on two coats....then white base coat...then my colors...i have heat set for as long as 3 or 4 hours....also i have tried createx clear on top and heat set that and then wait til the next morning to dip in dnites...same results...wrinkled paint....i might add that i use a lot of transparent paints if that makes any difference....also when mixing 50-50 i don't get good coverage...what about retarder???? parrothead do you or ANYONE have more suggestions??????? PLEASE PLEASE HELP

can anyone tell me if you need to stir dick nite's before using ??????thanks

the fins are definately hindering the swim of the bait....however i don't think it would swim without the fins on it.....you need a bill under the head (as you would see on other swimbaits or shallow divers) that deflects water and gives it action....for a bait that size i would try a bill approx 3/4 inch long and 3/4 inch wide. it is tapered from the front to back....try and see if it helps.....nugene

parrothead 127.....thanks for the imfo...actually i was not the one who asked the question but that is exactly ONE of my problems!!!!!!UNBELIEVABLE......you can bet i have already located the 105 and i'll get it this morning!!!!!what i did ask was ....what exactly is heat setting?????and how important is it??????thanks

hate to show my ignorance but please explain what heat setting??????