Jump to content

21xdc

TU Member
 View Profile  See their activity

  • Posts

    1,337

  • Joined

  • Last visited

  • Days Won

    47

 Content Type 

Everything posted by 21xdc

  1. 21xdc
    I have 300+ lbs of sheet lead and it's soft... I never saw any plastic on mine. Peel it off first if you can. If not, I'd melt it in a junk pot and pour ingots to use later in your good pot.
  2. 21xdc
    .
  3. 21xdc
    https://www.captainhookswarehouse.com/store/products/hooks-by-type/treble-hooks/
  4. 21xdc
    Eagle Claw L3886BP is a great hook.
  5. 21xdc
    I use a cone shaped bit in my dremel tool. Works great for me.
  6. 21xdc
  7. 21xdc
    It all depends on the patents that are carried and up to date on the original... many have no patents or cant get one because it's not different enough from others to apply. This is a good watch...
  8. 21xdc
    I use O rings... So I make a skirt, Slide it on to the jig, Then slide another O ring on after the skirt onto the jig barb. This also make a jig skirt flare out nice... Works for me.
  9. 21xdc
    Yes... I think it should be thinned some with xylol/xylene ... 10-20% The key to durability is it gets harder every day for up to 3 weeks.
  10. 21xdc
    Coupon Code: EB520 Gets you 20% off and free shipping.
  11. 21xdc
    Awesome tubes! I think changing plastics will solve the issue.
  12. 21xdc
    Dremel tool and small ball bits. Take your time and take a little at a time off.
  13. 21xdc
    Epoxy will not work on suspending jerkbaits… It is a thick and heavy clear that makes you bait sink like a rock. KBS Diamond Clear works much better. But I wont spray it through my brush's. I'll dip or quickly brush it on and hang or turn. If you are painting topwater or crankbaits, Epoxy might be fine for you. I don't like thick clear coats as it will rob some action.
  14. 21xdc
    I purchase by the Qt. I might buy a pint the next time. Open it up, pour it in a mason jar for storage. Keep the rim of the glass clean and wiped off before you replace the lid. Or you will never get the lid off again. Keep the jar open as little as possible. It lasts a very long time. I suggest you try the smaller size first. About once a month I get an e-mail with a coupon code of 15% off or free shipping. There should be one coming soon.
  15. 21xdc
    Just leave the eyelet as the drip point. I stick the hook in foam with the eyelet facing down. Or rotate. After a few hours pick off the drip on the eye.
  16. 21xdc
    I think it's your mixing method. But I quit using epoxy 5 years ago. If you start using KBS diamond clear and thin it with xylol/xylene I'm confident you will be happier.
  17. 21xdc
    Very COOL!
  18. 21xdc
    Yep. Easy to do. Put the wire frame, hook in the mold. Lay the WDB-1000 in the mold where you want it, Close the mold and squeeze in a vice. Then you will see "Witness marks" where the form needs to go. Barely and slowly remove mold material on both sides equally until the mold closes completely.
  19. 21xdc
    No
  20. 21xdc
    I think that is called the Glider jig...
  21. 21xdc
    Bass/Walleye/Pike … This product keeps getting harder over time.... 3 weeks to fully cure. But I fish with mine in 2 days.
  22. 21xdc
    Too many coats too soon... The product needs time to gas off. Not sure why you want 6 coats. 2 coats, 2hrs apart works fine. Using a brush can also promote bubbles over dipping.
  23. 21xdc
    multiple coats should be applied within 1-2hrs to become one together.
  24. 21xdc
    Sorry... Missed the previous post.
  25. 21xdc
    https://www.jettsonlures.com/
×
×
  • Create New...
Top