Jump to content

21xdc

TU Member
 View Profile  See their activity

  • Posts

    1,379

  • Joined

  • Last visited

  • Days Won

    61

 Content Type 

Everything posted by 21xdc

  1. 21xdc
    Because he nor I make plastics and don't want too... He wants to buy the mold and have someone pour them for him in certain colors.
  2. 21xdc
    They do... But it's not the same as the picture of his worms. He said nothing swims like his and the maker and molds are gone.
  3. 21xdc
    He wants exact... You know how picky fisherman can be. You linked me some 5 inchers...
  4. 21xdc
    Are you sure? I was told it is not.... Have a link?
  5. 21xdc
    I bought an 8in and it's not needed. I cut a hole in the top of this and sits down in it... Pics w/o fan... I recently upgraded to a $3,000.00 set up. Pics on bottom.
  6. 21xdc
    Not a fan of HF tools.
  7. 21xdc
    Where can I find this mold? Or someone making this bait? I'm asking for a friend.
  8. 21xdc
    I'd get a 6inch with close to 400 cfms… Something like this... https://www.ebay.com/itm/Strong-CFM-Ventilation-6-Inch-Inline-Fan-Hydroponics-Exhaust-Cooling-Duct-Fan/192809769902?hash=item2ce45b9bae:g:ecAAAOSwX3ZcSMvl:rk:49:pf:0
  9. 21xdc
    Clean with acetone, Spray paint to your liking. Dip with KBS Diamond clear and hang to dry 2 coats. Takes 3 weeks to harden completely, But can be handled the next day.
  10. 21xdc
  11. 21xdc
  12. 21xdc
    Those linked above seem to be too thick in diameter.. I'd look into these>>> https://www.ebay.com/itm/20pcs-Soft-Steel-Pole-Stainless-Steel-Fishing-Long-Pole-Swivel-Accessories/253807440337?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649
  13. 21xdc
    Because I can finish twice as many baits per mix with the wider brush... If 10 cents per brush is too much for you, I understand. But I save time and money on epoxy using the acid brush's.
  14. 21xdc
    I always crimp the metal on my brush's and pull any loose hairs out., Or you will get some shedding.
  15. 21xdc
    They work great for epoxy and you can cut the bristles any length or width you want.
  16. 21xdc
    You might consider these.... And use a coupon …... https://www.harborfreight.com/36-pc-12-in-horsehair-bristle-acid-shop-brushes-61880.html
  17. 21xdc
    I just checked my rotisserie RPM's.... It's only 2.25 RPM's and works great. I don't over saturate my clear coats. I brush off as much epoxy with the brush as I can and it's the perfect amount. I dip KBS and let it drip off the bait until I get 5-10 seconds between drips, And that's the perfect amount.
  18. 21xdc

    Base pins

    21xdc replied to Driftwood's topic in Wire Baits

    Looks like a Lil Mac mold to me... http://www.lilmacmolds.com/ I think they were designed to pour the weed guard with the casting.
  19. 21xdc
    A couple I did with the hair pick I posted above. Some not clear coated.
  20. 21xdc
    Hair pick
  21. 21xdc
    Some KO blanks are better than others. Good thing they are cheap. Trial and error is the only way I have found what I like. You may find some in the same batch are better than others. I think that it is mostly from improper weight arrangements.
  22. 21xdc
    Not yet... Cheap and locally available to me >>> https://www.dickblick.com/products/jacquard-airbrush-paints/ They offer a ton of different brands of airbrush paint as well. Look at the links on the left after you open this link.. https://www.dickblick.com/categories/airbrush/colors/
  23. 21xdc
    Nice work... My friend did this for me on water slide decal paper....
  24. 21xdc
    This is what I used on my exhaust fan in the past. https://www.harborfreight.com/router-speed-control-43060.html
  25. 21xdc
    No barb or collar? I'd pass and buy some from LPO.
×
×
  • Create New...
Top