Net Man

What type of Foil do you guys use and where can you buy it?

Here is a picture of one bait. Its not terrible doing it with two halves of wood But you have to put is all together in one step. I was just thinking that if I could get away from the harness it would be much faster. I glue the two halves together with epoxy and clamp. After it cures I sand again and coat with epoxy. Am I on the right track or is there more I need to do?

Looking back today it has been almost 5 years since I was last on here. Man I have missed it bad!! But recently I have been able to get back in the shop and doing some work. So today I come with a question about balsa cranks. I have built plenty of shallow divers with a through bait harness and they work great. In the last month I have been working on a medium diver with the line tie in the lip. I have learned that it is very difficult to do this as a complete through bait harness. Maybe I am making this to hard and maybe it is not a must. What are you guys thought on this? Is the through wire really required with balsa?

Do you guys have the secret for doing a matte finish on a crank bait? or just a flat finish??

Thanks guys. I just order some PETG from eBay. You guys are awesome!!!

Ok so my new water base paint came yeasterday. I ordered Auto Air colors and reducer. So I started reading thru the material that came with the paint. I have also read on the internet about painting with water colors. So I tried a test bait last night and it was horrible. The paint would puddle and run. The information that came with the paint said the mix it with reducer 3:1. I did but could not spray it because of the thinkness of the paint or my nozzle is to small. Here are my questions on this: 1) what is a "normal" mix ratio 2) What is the normal dry time? (I read to let the bait air dry before you heat it) True??? I feel like I am starting from square one again. LOL Thanks

Sorry Captain. I went back and looked and it was the stencil mold that I saw on there. Sorry about that.

I have been trying to vaccum seal some stencils so they fit like a mold. I heat the stencil material with a heat gun until it starts to melt and turn the vaccum on. It pulls about 75% of the stencil down but it wrinkles and just never get the profile of the bait. The stencil material I us is a frosted mylar that I got at hobby lobby. Have you guys done this and what is the best material to use for this?

www.dakotalakestackle.com has the 200 blank

This is one of them New Sweetness.bmp New Sweetness.bmp New Sweetness.bmp New Sweetness.bmp New Sweetness.bmp New Sweetness.bmp New Sweetness.bmp New Sweetness.bmp New Sweetness.bmp

A friend of mine wants me to paint a baby bass pattern on a jerkbait. I have painted a few but just not real happy with them. I was wondering what you guys might have? Thanks Net Man

Where do you guys get these images from to do this? I have never done this before and would love to try it. Is it hard to do? BTW they look awesome!!!

Can I use laq. with water base? If I use the superhide white can I spray water base over that or vise versa?

I am going to switch to water based paints. I have been using Lacqur for about 5 years now. I want to get away from the toxic environmenrt as much as possible. I have never used water base before. What do I need to know and what do I need to expect?????

I have been useing Omni for about 6 years. It is a low end from PPG. It works very well at 2:1. Recently I have been doing a little testing with D2T and than appling one coat of Omni. I like the depth of the D2T but some times it will yellow. So this lead me to try a single coat Omni over the D2T to cure the yellowing. So far it has worked but I am not sold 100% yet. Anyone else tried this???

My Brite Back came in the mail yesterday. I tried it last night on a bait. It is very stiff but I think it will work well. I am concerned about the weight of it. Have you noticed a difference with the action of a lure with this applied?

That is a nice looking bait. I will probably order some silver and paint it

Where is the best place to get foil for a bait? Do they make it with a adhesive backing?

Do you guys know where I can find some of this or what I need to mix to get a florescent red?

I have it in another room because I use it for other things. I had a big compressor before and piped it into my paint room so I just left things like they were. It is not very loud at all. It is a 2hp 4.5 gal oiled unit and I love it. Here is the model number: Ingersoll-Rand DD2T2 .

I recently bought a twin tank IR at Tractor Supply. I run 4 guns off of it and it works great. It has a regulator on it and it is good. I have the compressor in one room and hard piped into my paint room. I have a second regulator and moisture trap right beside my spray booth so I can adjust on the fly. Pretty cool set up for an ole country boy like me.

Thanks Vodkaman