tylerd1994

I poured these by pouring the mold halfway and clipping the tail off and leaving it in their. That is for the circle tail worm. It was alunimum. The other was a netcraft. I injected the tail then poured the body.

how do you fish one. I have never fished a stick bait. When do you fish them and where?

i did the elmers thing 50 water 50 glue but it just looks like normal. like the the mold sucked it up. I then put it on thick and it wouldnt dry. What should i do.

i bought this rtv silicone sealant stuff at walmart and squeezed it all into a small plastic box. Then i put a worm in it. I did exactly what you do for plaster or liquied rtv. I did all of that and the mold is just about to be 24 hours cured and 11 oclok tonight. Iv'e noticed it is real soft and its still not cured in the middle of the mold. Since its a sealant i think it blocked off air to let the rest cure. Will it eventually after a couple days cure? Or should i do something to it like drill a couple smalls holes in the bottom. If i need to do something what should I do? THANKS!!

which is better resin or rtv

Can you spray paint on a pop mold to make the baits come out shiny or do you have to use laquer or epoxy. If you use epoxy how much do you put on the mold:yay:

where can you get this

what can you use to package your worms instead of worm oil.

i was just wondering what other type of oils you could use to package easier other than worm oil

is there anything other than scent that can be used instead of worm oil that doesnt ruin your baits? maybe vegetable oil??

what can you use to substitute for worm oil instead of scent. could you use vegetable oil

what does mineral oil do to baits

can use mineral oil for worm oil

ive been doin it for a year or so im just experimenting with different things

thanks alot pastor shane

i also tried one time pouring two colors at once which was a chartreuse and black but it didnt work it just like mixed and made a green color

like these

i mean like there are two colors goin down the sides

where do you get those weighted hooks and what size are they

so how do you get the worms that have like colored streaks. do you pour two colors at the same time

i have two questions on multiple color pours. How do you do it?!!! with a fulll round mold. The next question is how can i make a like white belly on a frog and a green body or any other colors i tried pouring the belly first then putting it together and it didnt turn out. the belly peeled off also how do you get the multiple colored worms

okay

i have two questions about these 1. do you just dip the rod in your plastic and it makes the skirt looking tail and everything. 2. can you get a tube dipping rod for crappie tubes im confused with tubes so much

so can i just buy hot glue gun and it will work the same

i was just wondering if it was possible to use a hot glue gun to inject crappie jigs in a mold