KB Tackle
-
Posts
19 -
Joined
-
Last visited
KB Tackle's Achievements
Newbie (1/14)
10
Reputation
-
Elaz tech, the silicone will not cure. The materials are not compatable
-
Rub it on you your nose. That's the way you used to put 2 pc. rods together. I know it sounds stupid but it works.
-
Large Size Weedless Arkie Jig Mold 3/4 And Up...
KB Tackle replied to BigTimeBuzzer's topic in Wire Baits
I have a single cavity 3/4 oz. that I would be willing to part with. Do you have any molds for a possible trade? Thanks -
You can slightly roughen with steel wool or scrubbing pad. I've had excellant results using Krylon Fusion Primer (rattlecan) holds up great. Works so good thought about trying on a bait without roughening.
-
Need some (cheap) suggestions for devcon application. Been using some fine bristle nylon from walmart, but only last for a couple of baits before ruined. Is there a cheap substitute that can be thrown away after use? But still has good results? Thanks for any input. KB
-
What are your opinions on tip size for cranks? I have a paasche VL and tips 1,3 and 5. Which tips do all of you prefer? Thanks
-
O.K. guys I just posted my first attempts on the Gallery. I need some honest and open feedback on improvements and techniques. Thanks for all the information on getting started.
-
Here are two more of the first set. Thanks -
Here are two more of the first set. Thanks -
Here are some of your suggestions, your patience and advice. These are pics of my first attemps. Please give your feedback and advice for improvement. Again thanks for all of the information and advice. P.S. I have become addicted to painting. -
Here are some of your suggestions, your patience and advice. These are pics of my first attemps. Please give your feedback and advice for improvement. Again thanks for all of the information and advice. P.S. I have become addicted to painting. -
Here are some of your suggestions, your patience and advice. These are pics of my first attemps. Please give your feedback and advice for improvement. Again thanks for all of the information and advice. P.S. I have become addicted to painting. -
Back again, Is isopropyl alcohol the same as denatured alcohol? Tell you why I ask. I thought I read to prep for final devcon coat with alcohol.(to remove fingerprints) Well I used isopropyl alcohol and it wiped the paint off just like it was wet. Need help please! Thanks
-
O.K. guys, just started a couple of weeks ago, have done a few and have been tickled with the results. So I thought I was ready for a challenge. Wanted to do a sexy shad. Started with a mixture of pearl white and pearl silver, sprayed a turquoise pearl silver mix over that in a scale pattern, faded to dark turquoise top. I am happy dancing all around garage thought it looked great. Got ready for a gold stripe down the sides, RUINED BOTH. Question is how to you get the pretty gold stripe? (Do you mask it with something? Still Depressed!!!!!!!! At least with this stuff you just sand and start again. Any help on masking or advice will be appreciated. Thanks in advance......
-
What is best to thin devcon with? Also, how much devcon does it take to coat a medium lure?(1.5 or 2.5 size). And what would be the thinning ratio. Thanks for all the input.