Jump to content

triplextackle

TU Member
 View Profile  See their activity

  • Posts

    26

  • Joined

  • Last visited

 Content Type 

Everything posted by triplextackle

  1. triplextackle
    search at mcmaster for -Cut-to-Length Tubes works good for me
  2. triplextackle
    try using a lacquer , or oil base paint.
  3. triplextackle
    page 2979 @ http://www.mcmaster.com/#catalog/115/2971/=1fzaok Adhesive-Backed Hooks and Hanger
  4. triplextackle
    Cut-to-Length Tubes @ McMaster-Carr
  5. triplextackle
    google color shift paints, I found companies that sell the powder you can mix with a clear or paint to shift what color you want
  6. triplextackle
    createx makes a color shift paint AutoAir Colors
  7. triplextackle
    WOOPS I SHOULD READ MORE CAREFULLY, BEFORE I REPLY . DIDN'T CATCH THE C
  8. triplextackle
    temp at 200 is to low should be 350 for 15-20 min
  9. triplextackle
    how true it is , lol hope its OK I'm posting this in another site
  10. triplextackle
    circular saw with a carbide blade works for me
  11. triplextackle
    what are you trying to tye i have the one from fishhair
  12. triplextackle
    use light coats of paint, in between coats use a hair dryer to dry the paint. btw white pearl is very runnie, also does`t cover very well
  13. triplextackle
    Mustad 3418 or 34184 both styles are stronger than 635
  14. triplextackle
    McGill Inc. has this Hanger Hole Punch
  15. triplextackle
    I Do The Same , Buy From Local Butcher Shops. Problem Is The Season Is Over For Deer
  16. triplextackle
    Turn Heat All The Way Up, Set Mold On Top Of Pot Until Its Too Hot To Touch, Then Start Pouring,
  17. triplextackle
    I Have About 600 Tails
  18. triplextackle
    what are you going to build most midi-lathe will work,, best is either jet or rikon
  19. triplextackle
    I use mostly pure lead, as It is easier to pore. I also set my time based on when flash over acures in the baking process. I have also had bad batches of powder paint, does this happen with all colors you are using I to have never used epoxy over powder
  20. triplextackle
    if your painting after pouring than its not the lead. check or adjust your bake time, go to pro-tecs web site and check on color vs time. white should be 15 min other colors are different. make sure oven is pre-heated maybe go a little longer on time
  21. triplextackle
    lead must be clean for good adhesion, otherwise the paint will only be a shell around the jig
  22. triplextackle
    Are Your Jigs Clean Before You Apply The Paint i Can Smash My Jigs With A Hammer And No Paint Will Chip
  23. triplextackle
    TRY DO-IT MOLDS Do-it Molds: Ultra Minnow Spinner Jig
  24. triplextackle
    try this site ???? First Class Fish taxidermist supplier of quality taxidermy supplies for the taxidermist - Glass/Plastic Fish Eyes Taxidermy
  25. triplextackle
    all paint will chip, but powder is the most " chip resistant "
×
×
  • Create New...
Top