buckeyedave

dont know if you are refuring to me .......but those kind of remarks really makes me want to donate my money to become a member:boo: thought this is a site for people to ask questions ........ so now do i support the tackle underground and give them my money ??????? i will be thinking long and hard

i would like to post some pics i am running microsoft 200 pro and use a kodak easy share camera. the problem is the easy share software is does not work with 2000 pro does anybody know what other program i could use . thanks

well i tryed the calligraphy pen from the crafts 2000 store it worked but was a pain in the azz to me. also got a good deal on 25mm micron pigma pens on sale, one dollar each. tryed them, and the sharpie. found i could write alot smaller with the micron than i could with the sharpie . now as for the clear coat i found if you apply a couple light spit coats of clear and heat set ( i use a old hair dryer for that) you can then clear coat or dip with out the ink running

if i understand this right, you are losing pressure at the airbrush,not the regulator. if so try checking your air hose first. ( use a blow gun). if its ok check the rubber o rings in the brush , one of them could be coming apart and blocking your airflow ( i have had this happen to me) hope this helps.

good idea bob i think im gona try that.im going to the craft store tonight:worship:

been there, done that .i think every painter has done it once in there life

yep i use a hair dryer

congrats yep your hooked now

thanks for the info:yay: im going to try the water base kit

does anyone use polytranspar ???? i havent tryed it ,thinking about buying some to try . water base or lacquer , any info would help thanks buckeye

my advice to anyone wanting a good airbrush is to go with masters airbrush model g44 ...coast about 60 bucks 2mm needle will paint hairline out to about 1 inch i have done custom paint for many years now ,and own many high end brushes the masters measures up to brushes that i have spent hundreds of dollars on . i would suggest you buy a extra needle with brush they are very fragile drop it and your done trust me i know keep your airbrush clean, and lots of practice just my worth hope this helps

dan i would stay away from aztec brushes and save for a better brush. i have been airbrushing for years in and out of body shops i would try master model g43 has a 2mm needle will do a fine line spray coast about 60 bucks:yay: paasche talon 38mm tip also does a nice job, about 90 bucks:yay: paasche millennium 60 bucks:yay: iwata revolution cr 0.3 to 0.5 mm needle about 75 bucks:yay: just some of the lower end brushes i use all good and under 100 bucks the most important thing to remember is keep them clean clean clean........ and they will work just fine i have picked these brushes for there cost and ease of use hope this helps just my:twocents:

hope im posting this right? :?i was wondering were you guys do your work,shed .garage,basment,ect???? im in the middle of remodeling my 15x18 garage into a tackle making shop. could you post some pics of your shop . think it would be interesting to see other shops,and how there set up. maybe i could get some pointers how to set mine up as i am new to this very very very addicting hobby:drool: i will post my shop pics soon thanks

just sent you mail:)