SCBoatGuy

his site seems to be gone now.. http://www.shawncollinscustoms.com/

thank you

how do I find senkosams flake?

having trouble with some glitter colors bleeding into my plastic and changing the color of the plastic. Recently used lure craft purple in a green plastic and it bled and turned my green plastic a brownish muddy color. I barely had the glitter in the hot plastic for more than 2 minutes... heated in micro only twice. what brand glitters have you found to not bleed?

How do I find jacobs molds? I never heard of them.

I cant seem to find etex when I google.. is Etex an abbreviation for something else?

what mold is that from Pitbull?

try a good degreaser like Grease Lightning or Purple Power. You could probably even stick them in your dishwasher. It doubt it would get hot enough to mess up the molds.

I just bought the large lee plastic melting pot from Lure Craft... I like it but I have a problem... ths is my first time using a lee pot for plastic... I have one for led but i just leave it full of lead and never had to worry abut cleaning it (I dont do I?) well anyway... I mixed a cup of plastic and a 1/2 cup of salt and made some stick baits and now I cant get the left over plastic out of the pot. Eventually I disassembled the pot (removed the handle and the valve thing) so I could clean it o ut with very fne steel wool... now that I have it clean again,,, what should I do so that it doesnt do this to me again? do I need to prepare the pot somehow? PAM? worm oil? something else? I dont want to do anything to the pot that will mess up my pouring. Thanks in advance

Do you mean swirls with an injector? How do you make swirls with an injector?

I tried something similiar with finishin nails... but the darn nails slid out once i stood the mold on end to pour... perhaps the bit will fit more snug

Hi I have a do it molds weedless football head jig mold - Weedless Football Jig FBW-4-AF http://www.do-itmolds.com/prodmolds.aspx?c=28 Im guessing that many of you may be familiar with this mold? I also have a poison taill jig mold from do it too.. it is Poison Tail Jig PTJ-3-AFS http://www.do-itmolds.com/prodmolds.aspx?c=23 The poison tail has base pins so that I can pour my head and still have a hole for my weedguard. The football jig one doesnt have this... it seems my only option with it is to pour my heads with the weedguard in the mold but then I can heat up more than one head at a time (in my toaster oven) to powder paint coat them. What other options do I have with the football head jig mold other than to 1. pour them with the weedguard in the mold and then use a heat shield and heat up only one head at a time to be powder coated... or 2. leave the weedguard out then drill a hole for the weedguard once I have them poured (did this and its very time consuming) or 3. pour them with the weedguard in it and use a different process to paint the heads? What other options do I have?

Hi Im tryin to find where I can buy a mold to make bullet weights for worm fishing. Do It has a worm weight mold but it does not have a concave end on it and i dont want that. Im not sure where else to look to find a worm weight mold that would make a bullet weight with the wide end concave... i want sizes 1/16 - 1/4 atleast... thank you in advance