jesse1378
-
Posts
274 -
Joined
-
Last visited
Content Type
Profiles
Articles
TU Classifieds
Glossary
Website Links
Forums
Gallery
Store
Everything posted by jesse1378
-
We have a huge cookie sheet but it's thick. I would get some small cheap ones and put them on a griddle and pour on that. They will be thin metal so heated quickly and higher temp and small so your work time is extended.
-
Any updates? If it worked show us a video please
-
need some comments. i like these better than my first ones, but something still seems off. i think im gonig to make some better stripes. any other thoughts? these are not cleared yet, i will post some cleared pics after i finish upgrading my curing rack. also list which one you like the best. 2 options are here, the other 2 are in the next pic. -
need some comments. i like these better than my first ones, but something stll seems off. i think im going to make some better stripes any other thoughts? these are not cleared yet, that will change the bait a little i will post those pics once i finish upgrading my curing rack. also list which one you like the best. 2 options are here, the other 2 are in the next pic -
thank you. i hope to throw it this weekend. wont catch anything where i test my stuff, but its crystal clear -
all i have is the starter set of createx paints. its just plain ol transparent blue. i think the pearl behind it makes it pop a little.
-
thank you
-
thanks guys. top coat is etex. or enviro tex lite. you can get it at A.C. Moore or Hoby Lobby. i use my 50% coupons this bait actually has 2 coats because the first one was still tacky after 12 hrs. the rest will prob get another ctat as well we have lots of mudfish around here and they can destroy some baits -
love this friggin bait color. the green is actually yellow/green and is brighter than in the pic. favorite one yet.
-
messed up so i covered the bait in pearl silver then made a shad. came out nice
-
have a couple ideas to polish this one off and make it more realistic. but its gonna stay pretty close to this -
awesome thank you. i dont want the split rings or hooks anyway thank you.
-
does anyone make a knock off bandit blank? i want some 200 series blanks. thanks in advance
-
had to have been the ratio, i was in a hurry and didnt use my measuring mixing cups. im running low but i guess i will have to use one now and ill just throw a second coat on all of them.
-
i put a coat on 4 cranks and they came out fine, did a second batch and the 2 i put the Etex on are still tacky. couple questions.... 1) will a second coat affect the baits movement? 2) is it safe to add a coat on top of the coat that is tacky? i have read of people doing 2 coats, but i know that most of those people were using them on gliders so the action really wouldnt be messed up that much. these cranks are 1.5 KO if it helps.
-
for me to get a good flat side i slow down once the cavity is close to being full. i also like to pour plastic until the back is kinda mounded above the cavity that way when it shrinks it shrinks to flat instead of caving in. looking at the top of the head, that from the mold. you could try filling the cavity to just under that part on the mold and as long as you keep the plastic in the cavity you should have to worry about edges they should be perfect. -
can tips and needles be switched between brands? i dont think anyone around her carries the paasche stuff.
-
its a paashe dont know the model. ill double check the tips, im pretty sure i threw the 3s away mine only came with 3, and 5.
-
i have been having issues with my airbrush. long story short is basically wants to do the splatter effect ALL THE TIME. i have tried thinning the paint more, leaving it thick, turning the preassure on the compressor up, turning it down. i have a water seperator in line right at the compressor....that never has any water in it... one thing i have noticed is at the tip of the airbrush. my tip is a 2 part tip...little part that the needle pokes out of then a bigger part that holds the brass tip inside. right now im using a 5 tip and needle as i believe while i was cleaning i threw away my 3.anyway the tip. where i tighten the big tip to the brush i have been getting watery bubbles i cant tighten it down any more. after work im going to try to get some teflon tape on there and hope it doesnt get in the way of the paint. just not sure what to do at this point. i have done several good cleanings, looked inside and there are no blockages. any ideas?
-
i think alot of people use alumilite
-
im fishing seminole in feb and march and my confidence is sky high right now. she was only 2oz short of 7lbs too lol -
took 27 years but i finally got one. 6lbs 14oz and on my favorite lure...buzzbait
-
I got mine. they look great ran perfect (#6 gammies) i id find out the hard way...paint or atleast put some clear on the body the one i took out to test ended up gettig water in it and the BBs are a lil rusty now. If you plan on painting a "ghost" they have a little bit of a haze. overall they look and perform awesome i cant wait to lay some paint on them tonight.
-
Uv Reactive Plastisol Dye, And Tungstem Powder
jesse1378 replied to eric001's topic in Soft Plastics
i bought the sisson secret sauce adn just used that. he was a pretty nice guy you should contact him. -
be more specific. one piece, two piece mold. did you use salt? did you let it set up long enough before demolding. let it cure atleast 24hrs befor putting in the bag? you rig it straight? post a vid so we can see and better help you.
