Jump to content

nedyarb

TU Member
 View Profile  See their activity

  • Posts

    931

  • Joined

  • Last visited

  • Days Won

    13

 Content Type 

Everything posted by nedyarb

  1. nedyarb
    What color is chartreuse? Ive seen orange, green yellow purple..!
  2. nedyarb
    Thanks
  3. nedyarb
    I would listen to jrhopkins
  4. nedyarb

    Sealant

    nedyarb replied to Bassachusetts's topic in Hard Baits

    If you dont have a turner, Devcon 30 minute or bob smith 30 minute epoxy will be your best option
  5. nedyarb
    I dont use tungston weights. But I have seen them on the first page of basstackle.com
  6. nedyarb

    Drill Press Mod

    nedyarb commented on goolies's gallery image in Hard Baits

    Drill Press Mod
    Beautiful
  7. nedyarb
    I run a hair dryer over the lures to remove the bubbles
  8. nedyarb
    You guys are right, its not on there. I figured it would be
  9. nedyarb
    From montee ss https://www.roboworm.com/v/vspfiles/assets/images/2012%20color%20descriptions.pdf
  10. nedyarb
    Maybe this mold, its the el gusano worm. I dont own one but it says the tail is flat.
  11. nedyarb
    Microwave plate motor has worked great for me, and they are free. I glued my wood dowel to the motor
  12. nedyarb

    1.5 Silent

    nedyarb commented on Hokieangler's gallery image in Hard Baits

    1.5 Silent
    Nice
  13. nedyarb
    I would make the lure from balsa.
  14. nedyarb
    I took a crank coated with art resin and basically tried my best to break it, after about 40 casts there was zero hook rash or scratches. I threw the lure into this concrete wall from 30 feet away, at least 20 times. There was zero damage to the lure. I was suprised how well it did. The lip is .04 lexan and did not break either.
  15. nedyarb
    I use a turner, and wait 15 minutes to apply it after mixing. If you apply it right away it goes all over the lip and everywhere because its so runny. Im not sure how you could do it without a turner, it takes a couple hours just to stop running
  16. nedyarb
    Here is an art resin crank, it really is shiney and hard!
  17. nedyarb
    Thanks Jawjacker
  18. nedyarb
    The kbs dries overnight, but it takes 4 to 5 days to get rock hard.
  19. nedyarb
    Hobby lobby carries etex and bob smith 30 minute epoxy, both work well Do not use 5 minute epoxy for a topcoat it is not uv friendly and will turn yellow
  20. nedyarb
    So do you know where I can get one?
  21. nedyarb
    Where would I find someone to make me one of these?
  22. nedyarb
    Yes, .04 inches. I think it looks great, Im building 1 to 8 foot diving baits.
  23. nedyarb
    I have some lexan that I bought at home depot. The thickness is .093". I dont like how thick it is, so I went online and bought some .04mm lexan. Has anybody ever tried this? I am curious if it is too thin. It does flex a bit, but seems solid enough. Thanks
  24. nedyarb
    This pen has not bled with any topcoat I have tried. It works great. http://www.hobbylobby.com/p/4811
  25. nedyarb
    Wouldnt a metal rod glued into a teflon pin work?
×
×
  • Create New...
Top