Semi22lr
-
Posts
35 -
Joined
-
Last visited
Content Type
Profiles
Articles
TU Classifieds
Glossary
Website Links
Forums
Gallery
Store
Everything posted by Semi22lr
-
Those look good. I was having the same issue with the tips and oiled them up with worm oil and the tips started filling out better. I'm also going to make a green pumpkin/bubble gum laminate craw when I get a chance.
-
I could spend all day looking thru Reds molds.
-
Does Anyone Know The Recipe For Yamamoto Green Pumpkin Watermelon
Semi22lr replied to Big Ray's topic in Soft Plastics
That would be a 912. Caught more bass on that on then all other yamamoto senko colors combine. The watermelon side has some chartreuse in it. My buddy makes one that is pretty close but the recipe is mind boggling. I agree that close counts. -
Started injecting about 3 weeks ago as a hobby and ran into an issue when I reordered colorants from the same supplier. The first colorants I bought were in 1oz bottles. I used 24 drops of one color and 8 drops of another color in a Junebug recipe in 6oz of plastic along with stabilizer and glitter. Repeatedly made this recipe with very consistent results until the primary colorant was gone so I reordered a pint of each of the colorants from the same manufacturer to save some money. Now I can't get the color back. I've attempted thoroughly mixing the colorants by violent shaking the pint containers before transferring to smaller containers. No luck so far. Going to add a nut to the pint and see if that helps mix it better. Any other suggestions would be greatly appreciated.
-
Has anyone had experience using the Do-it Essentials sand cast molds? I realize the detail may be a little "fuzzy" but other than that do they inject well, realize the baits well, and hold up to repeated use? Thank you for your responses and Merry Christmas.
-
I have had these for many years and don’t use them. These are some of the most popular colors Mr. Harter made. I know that is is a lot of money but you can’t get them anymore. There are multiples of the same color on many of these. Here’s what you will get: - 28 that are in new condition and have never been used. - 2 that are in good condition but have a few minor scars - 2 that are in used condition and have medium scars - 3 that are in good condition but have broken lips Here are some of the colors(not sure I got the colors right): Sparkle Shad Dollar Bill Green Chart Silver Shad Gray Ghost Fire Tiger School Bus Bubblegum Can't upload but would be glad to email photos. Price is for cash only and no shipping. I will take Paypal for an additional 3% to cover my fees. I will ship if Paypal is used. Shipping is $15 additional which includes insurance. Low ball offers will be ignored. I don’t need to sell them. I can meet in Conyers or Lithia Springs, Ga. Call or text at: 7seven0 - Three3Five - Two8Two7.
-
I have had these for many years and don’t use them. These are some of the most popular colors Mr. Harter made. I know that is is a lot of money but you can’t get them anymore. There are multiples of the same color on many of these. Here’s what you will get: - 28 that are in new condition and have never been used. - 2 that are in good condition but have a few minor scars - 2 that are in used condition and have medium scars - 3 that are in good condition but have broken lips Here are some of the colors(not sure I got the colors right): Sparkle Shad Dollar Bill Green Chart Silver Shad Gray Ghost Fire Tiger School Bus Bubblegum Can't upload but would be glad to email photos. Price is for cash only and no shipping. I will take Paypal for an additional 3% to cover my fees. I will ship if Paypal is used. Shipping is $15 additional which includes insurance. Low ball offers will be ignored. I don’t need to sell them. I can meet in Conyers or Lithia Springs, Ga. Call or text at: 7seven0 - Three3Five - Two8Two7.
-
I would like one drop shot resin mold. Can not PM you because your box is full. Please PM me. I would pay using PayPal. Thank you
-
I did not see an injector in your supplies. Can you hand pour that mold? I thought all of Bear's molds were injection. I too am new to this and trying to learn. Can't wat to see your first pour in the Gallery.
-
Sweet...Potato. Who manufactured the mold you are using? Thank you -
Great looking baits. What's the recipe? -
Great job Frank! -
Here's a link to a Youtube video from this site:
-
Joe, Sent a payment for two molds via PayPal. Thank you very much, Mark
-
Search "wood lathe carver duplicator lure" or something to that effect. Here is one link I found: http://www.striped-bass.com/Stripertalk/plug-building-got-wood/61002-lathe-duplicator-question.html Hope it helps.
-
Do you have a photo of some of them? Thank you
-
Actionbaits, Trying to PM you but it says you cannot receive any more PMs. I will take two of them. Please PM me with your PayPal information and the total cost and I will send the payment. Shipping to Conyers, GA 30012. Thank you very much, Mark
-
I will take two of them. Unable to PM at this moment but will send one this morning with my shipping information. Will pay using PayPal. Thank you
-
I want to do a one piece or maybe a two piece POP mold of a fluke and need some advice on how to put in the hook slit. I was thinking of just using a divider from a plano tackle box but not sure it will stand up to the heat and that it will remain straight. Any help would be appreciated. Thank you,
-
Newbie question - What are runners? Thank you.
-
OK. I am very new to this and I am sure this is a very ignorant question which will give many of you a good laugh. That's OK, I am laughing with you. Can you make a worm mold out of Great Stuff or DAP expandable foam? Thought it might be a very simple and quick way to experiment with some prototypes. Thank you
-
Mend-It works great in gluing parts from different worms.
-
Mark, Great photos to go with your detail description of the process. I really appreciate it and plan to give it a try soon. Thank s.
-
Mark, Excellent detail. Greatly appreciated. Do you have any photos of the mold you can share? Mark
