Baitjunkys

add red and you will get it browner.

for argument sake, can you buy a 1000 nfl shirts and resell them outside the stadium. no.... ie end user license agreement. and ftr i only get pissed off when i do somebody right for 4 or 5 years and they stick a knife in my back...

you might wanna see if calhoun will let you resell it.

what really is happening. injectors dont have a wiper seal, so the oring lets it slide by, and build up just keeps happening. If it had a wiper, IE a square edged seal, it would wipe as it was pushed. Regardless of the plastic brand you almost always get the buildup. Ultramolds uses a wiping o ring in there shooting star, reason it don't have to be cleaned all the time. What else does not help, I see all the time, is shooting the plastic way to cold and man handling on the injector to shoot it, Inevitably pushing the plastic by the orings as well.

Science says it will hard pack, Especially if you have to mix the hell out of it like said, It may not pack hard like drywall mud, but there will be some settlement eventually.

it certainly was at first. i have no clue what they got going now, I wish them the best of luck. its a dog eat dog business.

Well this thread is a year old, and the product has changed recently. Try some and see if you like it, don't always go by what others propaganda.

I'm gonna some this up for everyone really quick. People expected the cheapest ass product they could and still wanted to complain. So we started degassing pre shipping. It is exactly the same plastic. this allowed us when people cried about bubbles to say, you should have bought degassed then. Most every plastic is mixed under a vacuum, science says if you don't do this your going to whip air into it. Now this also has many dependencies on viscosity. Aka lurecraft to my knowledge does not degass, but there product being a good product for most, don't misinterpret my words, has a very thin viscosity, aka settles fast. So it can mix easily without degassing. same goes for lureworks, it to has a thin viscocity. reason they can sell it under injectasol easily not degassed... There suspendasol, now is like mayonnaise, Reason you guys cant use it effectively as you cant mix it without whipping in air very easily. Now you have moisture, looks just like air, acts like air etc. Degasser will also extract moisture, I sure hope this clears some air without any feelings being hurt.

FTR, that happened for about 2 weeks, not 7 months. when they took our name of it and rebranded BJ 200, they were using there own formula.

scientifically, why would it?

were you find degassing a advantage, is the ability to mix the hell out of it, and post degass. It is science and it is a chemical, it is going to settle, and it is going to aerate at it current viscosity. a thinner material dont aerate as badly if at all. But...... Thinner material also has other drawbacks. Like it ability to suspend.

You just have to get them off quick while they are warm, I got some squid lures here that are about a 300 durometer, and they get them of some mandeals that are really big. All the hollow body frogs are done the same way as well. Just got to be quick.

3 days is more adequate.

No difference, they dont schedule the delivery the post office does.

You are correct!! https://www.ispikeit.com/topic/shipping * Transit times are estimates based on carrier websites. Estimated days are business days only. These transit times may vary with the carrier.

I have no affiliation with them, But have been in business long enough to know, Once it leaves our door, there isn't nothing us suppliers can do. We can only present what shippers tell us. Now if she talked down to you etc, This is a different story.

Id like to see the emails.

you realize priority mail is not guaranteed, its only estimated right? If they sent it priority on Monday, what else do you expect them to do?

Did you call them? Did they talk to you badly, treat you badly? Or are you just saying they are trash because they had a screw up? I gauge customer service on how well they help resolve problems, No one is perfect.

Hot Mandrel Dipping?

I don't really have time to explain heating principles, A measuring cup on a hot tray is not even close to the same tho. Pour some plastic on your hot plate and let it set, this is more realistic to how a heat exchanger works.

I sure wish it was that easy, I really do. Heat exchangers do not cool or heat instantly. Typically it holds 2x the amount used. If you used 4 ounces you would need to do so every 2 minutes or so, or what is left will just burn up. Yes even the no scorch stuff people claim will burn up to. And unless you color the whole barrel, what goes into the heat exchanger is colored and glitter while in its raw form. It is very doable, with a 1 pound heat exchanger its sure can be done, just not as simplistic as most people want nor there idea of cost wants. I can pretty much promise you to buy this setup all ready to dispense, your gonna spend minimum of 4000.00... Building it yourself is doable as well if you can get anyone to share there knowledge with you.

I dont me to sound condescending. And I apologize if I do. That being said, Cant and wont are two different terms, I can promise you, It takes a whole lot of put in, before you can ever take anything out. You got to go into business planning to spend money or it just don't work out. Not just on the website purchase but in general. As a good friend told me one time, You can not sell out of a empty wagon. And that wagon does not magically fill up.

Most of the time, the name is in there as they provide a generic SSL. If you buy your own, as any real legit business should have, then you will just have your domain name only. I do not buy anything that is a sub domain of something else, For example. Colesbaits.3dcart.com This is a example of a shared ssl. IMO if a guy cant afford 29.00 a month to use 3d cart, or some other service that is not free, he should just keep it a hobby.

Yes..