Jump to content

Les Young

TU Member
 View Profile  See their activity

  • Posts

    1,083

  • Joined

  • Last visited

  • Days Won

    34

 Content Type 

Everything posted by Les Young

  1. Les Young
    I was going with green pumpkin but mother nature told me to stay home tonight.
  2. Les Young
    Nice job. I just got through rigging one of my tubes up for the tournament tomorrow night. That is if the weather doesn't screw those plans up.
  3. Les Young
    I have the screws taken out of almost all of my molds & use the plastic squeeze clamps. I put on as many as i can get on them on just to be safe.
  4. Les Young
    You'll be satisfied with Anglin A I without a doubt.
  5. Les Young
    baitplastics is as good as it gets.
  6. Les Young
    spike it has their lureworks red bug colorant. It's pretty strong so it goes a long ways.
  7. Les Young
    I use a cap full of heat stabilizer when heating remelt too if it's been sitting a while. If it's fresh i usually only reheat a small amount & don't use stabilizer then.
  8. Les Young
    Do you not realize how many folks use a tooth pick to do what i mentioned? I have a small metal skewer but have used tooth picks plenty of times to stir in a minute amount of colorant. what i said will work just fine.
  9. Les Young
    I just got 5 gallons of bait plastics plastisol in from ups a few days ago. 3 gallons saltwater hard 312 & 2 gallons medium 212. The 312 holds up real good for crappie lures & also works great for making some big ribbon tail worms that my buddies use as trailers on their musky spinnerbaits. It's some good stuff.
  10. Les Young
    Yep it is a good color that lots of folks use to fish.
  11. Les Young
    You could try some red & dip a tooth pick just slighty in some white to give it a pinkish hue. Just dip maybe an 1/8 inch & stir it in then if not enough repeat the process. It should take very little to get the pink look if you're dong a small batch.
  12. Les Young
    Yes they're legit & one of the big players in the plastisol & bait making products business. I buy pretty much all of my colorants from them.
  13. Les Young
    I make the essential series finesse worm, essential series ribbon tail worm & an 11 inch ribbon tail worm that i fish hard in summer & make them all with bait plastics medium & it works great.
  14. Les Young
    The angling ai mold Chris has is a great jig trailer or hula grub with the skirt attached. I also have a few of the artificial stone molds from bug molds & all have worked great.
  15. Les Young
    I'm using bait plastics plastisol & myself personally i like medium for everything except for mixing 50% hard/medium for tubes & lately i'm liking saltwater hard for crappie lures.
  16. Les Young
    Almost any good mold maker will have some kind of waiting period. Most make lure molds as a secondary line of business too. The last mold i bought from Josh had a three week waiting period & when it hit the line they sent a message stating that. Can't get much better than that in my opinion.
  17. Les Young
    OIR has a good video on here about fixing the cheap injectors. He used a collar that goes on a drill bit & had a set screw to be able to tighten down where needed to install on the handle below the knob of the injector that would work great to keep the tip from shooting out. I'd check his stuff out because he has some great ideas. The video is under the" Mistake I Made Buying An Injector" here in the soft plastics forum just a couple threads down from this one.
  18. Les Young
    If it's safe & works good for you that's all that matters.
  19. Les Young
    I have the dual & a single 6 ouncer from basstackle.. I have taken it apart to use in combination with the single 6 ouncer to shoot 18 ounces at a time when wanted. You can make a bunch of baits in a hurry like this. What brand is your 4 ouncer?
  20. Les Young
    I always demold in 3 minutes. It was a little different at first since i'd been using calhouns & lureworks but after getting use to it i really like it & is all i'm using now. It seemed a little oily to me at first but cured up excellemt in my opinion. I'm getting ready to order 5 gallons now.
  21. Les Young
    Baitplastics is some good stuff.
  22. Les Young
    I'd say the medium/ hard would work well. I use medium & add hard at a 50-50 mix to make tubes & it gives them what i consider the perfect firmness & still not to tough & the tails have good action. The medium/hard should be some good stuff i'd think.
  23. Les Young
    Bill i've only used the 212. You could call them & they'll answer any questions you have. I've only used the medium 212 & the hard & like them both a lot.
  24. Les Young
    OIR nice job as usual like everything else you post.
  25. Les Young
    Just be very careful pouring it in so you don't get burnt. Sucking it up & turning the injector over on an angle & purging the air out of the injector is very easy to do so that's what i do each time & it works great.
×
×
  • Create New...
Top