TerryF2858
-
Posts
206 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Articles
TU Classifieds
Glossary
Website Links
Forums
Gallery
Store
Everything posted by TerryF2858
-
got some 26 gauge pfte coated wire, going to try to paint them and bake them all on the same wire hanger, hoping the paint wont chip taking them off the wires.
-
do you leave it in until you have done the final bake and then remove it?
-
liked the black theme better
-
welcome to TU, you will find a wealth of knowledge here and everyone is very friendly
-
I use an old kitchen spoon the small one not the soup spoon size. It works great for me.
-
They might have some in late April or early may best they could tell me
-
Waiting for reply from them if any are even still available
-
show me you ideas and fixtures for making the solder ice jigs. I want to make the teardrop ones with the small silver ice blade you solder the hook on, and holding the hooks in place is difficult. thanks for your ideas terry
-
Link?
-
merry christmas to you and your family and to all the great people on this site
-
That little tip made a big difference thank you
-
ok that makes sense
-
I will have to watch the video much closer to see what i do wrong. Probably have to get it up on the pc with bigger screen Thank you for the ideas
-
i would like mine to look like this but they look like you just twisted the wire like a bread tie, i have the Boggs bender, any help or ideas? i use .024 wire shafts with 1 eye already on them. if i need a different one then i would look for any suggestions
-
if you are worried about it coming loose from the hot days, or in a hot car, you might look at fletching adhesive for arrows, some of the guys say it works better, but i have not tried it
-
wish one of the companies would buy it up and bring it back, i saw on here somewhere that a guy made his own, it looked great. he mush have had access to a good machine shop
-
its been like 2 winters since i got mine, and BASS did an article about 1 yr ago, and the place was non existent after the article, so at least 1 yr
-
i was looking for a spare also, but they are out of business, and have not found anyone with one to give up
-
avid bass shows them in stock today
-
if anyone makes these bodies, from the do-it mold, could you give me measurements for the 1/16 and 1/8 sizes, I am trying to match the old brass body I used before and the price for them has gone way up so may go to this body, or buy them if anyone sells them either painted or not painted. thanks t
-
dinger baits or get bit custom baits?
-
try the hardware store for washers for your faucets, some are really small
-
They came from janns netcraft
-
made mine out of these, seem to work just fine
-
no Curt said somehow the original post got lost or deleted
