All Eyes

The strips are made from the same wood as the blank. They are cut with a table saw a fraction less than the width of the blade used to make the slot. The picture here shows how I trace the wire tag ends on the end pieces. I cut along this line with a skill saw so that the wood fits tight against the wire inside the bait. They then get dry fitted and pressed into place. Then draw a line flush across the belly where the access wood gets cut off with a skill saw. You end up with puzzle pieces that fit perfectly. I pour epoxy into the slot and also apply thin coats to the strips before inserting them into place. The epoxy oozes out and can be a bit messy as I smooth it over with a latex glove finger. It fills any gaps, or air voids in the process. I like using this method to minimize the amount of epoxy or resin material that can separate over time as the wood expands and contracts. Hope this makes sense.

Thanks everyone! These gill patterns are one of my favorites to paint.

Thank you guys!

More beautiful work in these latest baits of yours. Great fades and use of color!

Thank you! It's a thru wire wood bait.

Thank you! Much appreciated.

Love your paint schemes. Nice subtle use of color and application.

Thanks a lot!

Thank you. The scales are done with this thin material epoxied under the foil. Just press and rub.

Your paint jobs/schemes all look great! Very nice work.

Beautiful work on all your new ones. I like this one a lot! Well done.

Thanks! I've been on a foiling kick lately.

Very nice!

Thank you Mark! The scales (or rather dimples) are done with a Dremmel. The slightest touch leaves an indent. It doesn't take very long to do at all. It's much faster than gluing down a netting material which is how I do scales on some foil baits. The scaling is more of a random texture done this way but still makes for a nice effect and reflects a lot of light.

Nicely done! Very cool natural pattern.