Rustyfawcett
-
Posts
25 -
Joined
-
Last visited
Rustyfawcett's Achievements
Newbie (1/14)
5
Reputation
-
Rustyfawcett changed their profile photo -
https://www.amazon.com/Gary-Yamamoto-Fading-Watermelon-9S-10-194J/dp/B0007T0WM0
-
I am looking for a fading watermelon color. Thanks
-
Thanks people. Thinking about trying it also with glass beads and toughen it up a little.
-
Here is my first soft plastic shoot. Overall pretty happy with the color. Green pumpkin and brown pumpkin mix black fleck. Do-it icraw
-
Cadman I pulled them out of the oven and they was all matte. They actually looks pretty sweet in the matte black. May have to play around with it now. Thanks.
-
No i found the problem. It's matte paint. Grabbed the wrong paint stupid me.
-
Have a question for the group I have painted hundreds of jig heads and have never used black up until today and what I'm coming across is that I'd say 10 or maybe 15 jig heads came out to almost a matte finish any reason why I am using fluid beds but I'm thinking I don't have enough air cuz it's not moving around like any of my other paints could that be the reason why that this is happening. When I put my jig head over the burner I'm waiting until it gets a gloss finish like I normally do with any of my other colors but I'm unsure why this is happening Thanks for the help.
-
here is on I made a while back as you can see it hold a ton of paints wire rack cut down and stapled to 1x frame
-
hey Les
I had post a comment on a response from you about making a press cutter for tubes. I did not know if you will see the reply so I wanted to send you a message as well. I am looking to make on my self and wanted to see if you was willing to send me a few pics of the one that you made. thank you
-
Les would you mind sending me a few pics of the press you built. I have been looking for some other pics and can't find any. I have been thinking about going the same thing. thanks
-
If I get a 5 gallon bucket of plastic how many 4in tubes do you think I could get out of it. That bait shop wants to buy them from me and trying to figure out a price. But I have no clue how many tubes you would get. They would be injected not dipped. Thank in advance
-
Essential Series Plastisol from do-it
-
Would you mind posting the recipe for it. I am new to this it's going to be a first attempt.
-
yes they was garlic and salt
-
I know this is also a older post but don't know about heat proofing the bondo but for the warping you can add small metal rods the length of the mold inside the bond .also adding fiberglass strands to the mixture after the first coat over the master will also help. we had the same problem making metal castings for model train parts and we found that it helped
