Hey guys i have a question about Boss powder paints....I purchased a few different colors for use on some jigs. I did a few test runs with the powder and found out that the paint chipped of the jigs very easily after a short time on the water. I used a heat gun for the initial application the baked in a toaster oven. I noticed on there web site after the fact that they recommend preheating the jigs in the toaster oven for 10 min at various temps.depending on the powder... then dipping them into the powder paint, and returning them to the toaster oven to finish. Does anyone have any feedback on best process for these powders? Thank you guys! Jason