Georgie
-
Posts
3 -
Joined
-
Last visited
Georgie's Achievements
Newbie (1/14)
0
Reputation
-
Thanks for your input. Sometimes we get the cloudiness and it may be to being underheated, from time to time, below the 350 dF threshold. I will try to make sure we heat to that temp throughout the pour and see if that helps. We do not add any stabilizers or such, so that is not the problem. Thanks again for the input and ideas!
-
Some colors typical are a light orange, light red, light green, etc.
-
several custom color blends we use which are all clear and transparent. Have tried remixing and re stirring drum contents but still get same problem, but not all the time. Could temperature of drum contents be the problem? MF has been re-contacted several times and does not know what to do and cannot or will not contact his manufacturer engineers with the problem. He suggested we go to this web site for info from others. Drum is kept in garage and is susceptible to temp fluctuations.
-
Been using Plasticsols from MF and sometimes have a "cloudiness" issue rather then a clear, translucence with various colors. Any ideas as to why this may be occurring? Any others have this similar problem with MF plastics? MF can give me no clues as to why. They are not very helpful! Using from their large 55 g drums in unheated garage area.