Search the Community
Showing results for tags 'ac1315'.
Found 2 results
-
Two lures I recoated, first in Sally Hansen's "In The Spotlight" clear with mylar bits, and then dipped once in AC1315. Both were fished hard yesterday, including a couple of rocky landings (wind aided, of course). The jerkbait is a newly recoated bait, a Zipbaits Orbit 80 in the 409 paint scheme, so it has no other finishes under what I just put on it. The second, an older Yozuri 3D vibe (3/8 oz), had been fished hard before, and the original body had some hook rash on the plastic. I recoated both, and I was happy because neither shows any damage or change from when I took them down off the drying rack above my workbench. The hook rash on the 3D vibe is actually the old hook rash, reading through the new coatings. The mylar strands that cross the old rash are still intact, so the AC1315 really performed well. I'm a happy camper. -
Two Predator Baits knockoffs I cleaned with an acetone dip, painted with Createx and Wildlife Colors, heat set each coat, and dipped once in AC1315, all on this last Thursday. I hit the AC twice with the hairdryer, lightly, after it was dry to the touch, about 30 minutes after dipping. I fished them both yesterday, and caught fish on the square bill, bumping shallow rocks and coming over and through grass. The finish on both lures looks like I just dipped them. These pictures were taken this morning while they were still tied on.
