Search the Community
Showing results for tags 'envirotex lite'.
Found 1 result
-
Hi I am in the process of completing another 3 lures, while doing top coating with envirotex lite I came across following problems not able to sort out. How I did it ; First I clean the lures with rubbing alcohol and put them on my drying wheel. Mixed resin & hardener thoroughly for 4 minutes before applying on the lure and start my drying wheel. After 15 minutes I use hair drier to blow away air bubbles if any. Kept the lures on drying wheel for 4-5 hours and then stop keeping the lures still on the drying wheel for curing. The coat was uneven at all the places with small pots and lumps at few places. After 72 hours I sanded the lures lightly and tried putting thick coat and the end result top & sides of lures were nicely finished but the belly is in bad shape with pots at few places & lumps. Here are the pictures : Would appreciate if some one advise me where I went wrong and how to correct the belly now. Thanks & Regards, Raghubir
