Search the Community
Showing results for tags 'for the muskie guys'.
Found 1 result
-
I made this simple little tool to make the final neat twist for the .051" wire and is slim enough to do the final loop I start my loop with the Knipex round nose pliers Than I insert the wire in the Jig and use lineman's electrician plier to twist the wire How to make the Jig need a piece of 1/4 stock by 1.0 or 1.5 inches and around 4 inches long by 1/4 inches thick Drill press 10-32 tap and matching drill Cut the slot first ( I use a hacksaw and finish up with Dremel tool) Last drill and tap the screw hole use a s/s 10-32 bolt about 1 inch long cut the head off and notch the very end of the bolt Note the notch traps the wire Have Fun Gino
