Search the Community
Showing results for tags 'lead mold'.
Found 2 results
-
1. make first part of the mold and let it set for 3 hour , put it in the freezer (cold play-doh is more easy to remove) 2.after cleanup brush on: Liquid Release Agent Wax (Day 1) 3. day 2 add more Liquid Release Agent Wax 4. day 3 add Liquid Release Agent Wax let it set and make part 2 of the mold (:to remove play-doh put it in the freezer and let it get cold remove as much as you can and clean the first part of the mold using a nailbrush and water ) . RTV High Temperature Silicone Mould Making Rubber and Liquid Release Agent Wax (dwrplastics ebay)
-
I am having trouble pouring some baits , I have 2 do-it shad jigging spoon molds. and basically regardless of size these molds are really tricky to fill out. This is what I have Lee production pot The lead scuba diving weights (sort of hard) Fluxed with wax Molds are smoked I do have a small ladle and with the small lures they come out with a reasonable failure rate. With the big ones 4 oz and 6 oz I was not able to get a single decent pour. Do you have any hints, right now I am thinking about getting better lead and a bigger ladle
