Search the Community
Showing results for tags 'rippin & lippin tackle'.
Found 4 results
-
Made a clay original to be similar to the tiny torpedo. Sanded till smooth coated in a clear coat casted it in a silicone mold. Then used the mold to make a Feather lite Resin blank. Airbrushed the black to ressemble a young peacock bass. Lure dipped the eagle claw trebles red. And clear coated in DEVCON epoxy. All parts minus the resin and silicone were bought through LPO.© Rippin' & Lippin' Tackle
-
It's a Tri poured swim bait with black glitter in the custom shade of green back and solid black line for the lateral Line and a non bleed white belly. To help its toughness it's dipped in a clear plasticsol to seal the layers. All parts bought through LPO. -
Starts out tied on a #1 streamer hook it has a big fly fiber base. Next I tie in some barred orange saddle hackle for more motion in the water mixed with some copper flashabou. Then on top I tie plums of orange marabou. I put on a large foam popper painted black a set of red 3D eyes and I finish it off by pulling a cluster of flashabou through the popper to push more water and give it just the right amount of flash in the water. -
This is a jitterbug I created from making an silicone mold from a segmented jitterbug. After I made the blank I airbrushed it to mimic a Brook trout. I used Createx paint and all the hardware was purchased from LPO, the finish is DEVCON epoxy and the eagle claw trebles were lure dipped red.
