theboywhite Posted September 22, 2007 Report Share Posted September 22, 2007 OK first off, as this is my first post on here, I'd like to say hello form Scotland. I've just started making my own soft plastics (bulldawg size twin tail things). I have been doing fine with single colour pours and kind of mixed two colour pours, but when i try to get a distinct line between the two colours it doesn't work. can anyone help? thanks martyn Quote Link to comment Share on other sites More sharing options...
nova Posted September 22, 2007 Report Share Posted September 22, 2007 Wait for the first color to set up a little before you pour the second color. The second pour must be hot to make a good bond and the mold must be warm before you pour the first color or you will get a "cold crack" between the colors. Welcome; by the way. www.novalures.com Quote Link to comment Share on other sites More sharing options...
theboywhite Posted September 23, 2007 Author Report Share Posted September 23, 2007 thanks nova! the cold crack was the problem i was having, probably not had the second pour hot enough. Quote Link to comment Share on other sites More sharing options...
SwampBaits Posted September 23, 2007 Report Share Posted September 23, 2007 It also helps to pour slow on the second pour if the molds not to hot. Quote Link to comment Share on other sites More sharing options...
