Vignot' Posted November 13, 2007 Report Share Posted November 13, 2007 Hello everybody, I wonder what method you use to place the guides on a blank. After some Googling, I've found the "tip pulling method" and a "static deflection method" that I don't really understand : http://www.anglersworkshop.com/aw/article_html/Applications_for_Static_Deflection_Guide_Spacing.doc.html My english is not good enough and I'm lost at the #13 step. Is there any other method to get a proper stress distribution ? I'm talking about conventional bass rods. Thanks, Vignot' Quote Link to comment Share on other sites More sharing options...
HookUp Posted November 13, 2007 Report Share Posted November 13, 2007 If you're talking conventional 'spinning' bass rods, this is the best article I've read: http://www.rodbuilding.org/library/newguide.html Quote Link to comment Share on other sites More sharing options...
Vignot' Posted November 13, 2007 Author Report Share Posted November 13, 2007 Thanks for the link, I missed this one. Quote Link to comment Share on other sites More sharing options...
