kbkindle Posted November 18, 2007 Report Share Posted November 18, 2007 kb here do any of you guys know where i can buy some white cedar lumber. i e-mailed poes and asked them what kind of cedar they use and they told me white i have a lot of red cedar and aromatic red cedar but no white. i guess its grows in upper wis. and min. and down the east coast to the carolinas. kb Quote Link to comment Share on other sites More sharing options...
bassinfool99 Posted November 18, 2007 Report Share Posted November 18, 2007 Try here: http://www.itascawoodproducts.com/shop.php?product=cedar&cart_id= Don't know exactly how the quality or price compares to other places, but what I got from them was good. Quote Link to comment Share on other sites More sharing options...
mark poulson Posted November 19, 2007 Report Share Posted November 19, 2007 Do you buy thin stuff and laminate it? If so, what kind of glue do you use? I've used Gorilla Glue, and it seems to hold fine. Quote Link to comment Share on other sites More sharing options...
kbkindle Posted November 20, 2007 Author Report Share Posted November 20, 2007 kb here when i buy wood for my cranks i buy it at least 1" thick and that takes care of all the sizes i need for cranks i dont build any crank's thicker kb Quote Link to comment Share on other sites More sharing options...
bassinfool99 Posted November 20, 2007 Report Share Posted November 20, 2007 Mark, I did laminate some 3/8" pieces with epoxy to make a thicker bait. but if were to do it again, I'd probably ask them to special cut me some boards that are as thick as I needed. Quote Link to comment Share on other sites More sharing options...
mark poulson Posted November 20, 2007 Report Share Posted November 20, 2007 Bassinfool99, I use solid when I can, too. I just had some 3/4" pine and wanted a 1 1/8" blank, so I glued some up with gorilla glue, clamped it overnight, and it seems to be fine. A happy accident is it gives me a centerline to work off of. I glue one face, and wet the other, then rub them together to spread the glue everywhere. It expands when it sets, so it fills any voids and it's totally waterproof. Of course, if my Envirotex Lite clear coat lets water in, I have bigger problems than a glue bond. ) Quote Link to comment Share on other sites More sharing options...