jim45498 Posted November 25, 2007 Report Share Posted November 25, 2007 How long do I leave my lures on the drying wheel? I use the Devcon2T. Quote Link to comment Share on other sites More sharing options...
benton B Posted November 25, 2007 Report Share Posted November 25, 2007 I turn my baits for 1-2hrs and then hang to cure. Quote Link to comment Share on other sites More sharing options...
t_miller316 Posted November 25, 2007 Report Share Posted November 25, 2007 same here. i turn for about two hours then hang overnight to finish the curing process. Quote Link to comment Share on other sites More sharing options...
BobP Posted November 25, 2007 Report Share Posted November 25, 2007 At room temp, properly measured and well mixed D2T will not sag after 60 mins. I usually give it 2 hrs just to be safe, then hang it to finish curing. 8-10 hrs, you can remove epoxy from hangers, put on trebles, etc. Wait at least 24 hrs before fishing it. Quote Link to comment Share on other sites More sharing options...
jim45498 Posted November 25, 2007 Author Report Share Posted November 25, 2007 As usual, you guys have some great info. Thanks Quote Link to comment Share on other sites More sharing options...
