Sinko Baits Posted December 10, 2007 Report Share Posted December 10, 2007 Looking for these (see pic). They were custom made by a guy who is out of business due to health reasons. I don't know squat about these but a friend wants some. Don't need the skirts on them or the heads painted, just the basic forms. Any of you custom S/B builders make them? Thanks... Quote Link to comment Share on other sites More sharing options...
Spike-A-Pike Posted December 10, 2007 Report Share Posted December 10, 2007 I don't make them but have seen them on Stamina's web site - they call 'em Twin Spin Wire Forms http://www.upnorthoutdoors.com/stamina/wires_wireforms/twinspin_wireforms.html As for the spinnerbait head, it looks like a modifed loop type with the loop turned an extra 90 degrees and the twin spin wire fixed around the shaft with the twin arms going through the loop. http://www.upnorthoutdoors.com/stamina/spinnerbait_heads/bullet_spinnerbaitheads.html Hope this helps you get started... Bruce Quote Link to comment Share on other sites More sharing options...
Sinko Baits Posted December 10, 2007 Author Report Share Posted December 10, 2007 Thanks for the info Bruce. I am not good with wire baits. I did check Stamina out but I don't have any wire bait tools either. I am hoping someone on here can make them for me. Maybe even work out a trade for some of my custom soft plastics???? www.sinkobaits.com Thanks for the reply. Quote Link to comment Share on other sites More sharing options...
dlaery Posted December 10, 2007 Report Share Posted December 10, 2007 You could try this place: http://www.banddcustomlures.com/ Quote Link to comment Share on other sites More sharing options...
texasbass1 Posted December 10, 2007 Report Share Posted December 10, 2007 Try Secret Weapon Lures and check out the Side Kick. A knock out twin spin Quote Link to comment Share on other sites More sharing options...
Biscuit Posted December 11, 2007 Report Share Posted December 11, 2007 Here is exactly what you are looking for. barlows carries them. http://www.barlowstackle.com/acb/showdetl.cfm?&DID=6&Product_ID=1130&CATID=114 Hope this helps Quote Link to comment Share on other sites More sharing options...
texasbass1 Posted December 11, 2007 Report Share Posted December 11, 2007 http://secretweaponlures.com/swhome.htm Here is the link to Secret weapon lures. This system allow you to build exactly what you are looking for in a spinnerbait. Quote Link to comment Share on other sites More sharing options...
Sinko Baits Posted December 12, 2007 Author Report Share Posted December 12, 2007 Thanks for ALL your help who replied. I did find a source for these since B&D is not responding to emails or calls. I heard they are out of business.? ? ? ? ? Quote Link to comment Share on other sites More sharing options...
BigTimeBuzzer Posted December 14, 2007 Report Share Posted December 14, 2007 I Have A Bunch Of Those Out In The Shop. I Ordered Some And Did Some Tinkering And Left It At That. If He Can Not Find Any Pm Me And I Will See What I Can Do To Get Him Some Of Them....btb Quote Link to comment Share on other sites More sharing options...
robbor Posted December 14, 2007 Report Share Posted December 14, 2007 It depends on what you want. If you were after lots of vibration, there nothing wrong with a large colorado blade, If you want willows then a single or double willow and if you want noise the blade clacker design is much easier to build. Quote Link to comment Share on other sites More sharing options...
zx202guy Posted December 16, 2007 Report Share Posted December 16, 2007 www.ausspinlures.com Quote Link to comment Share on other sites More sharing options...
Bill M Posted March 15, 2008 Report Share Posted March 15, 2008 The B&D web site has been shut down,and no return calls or e-mails Quote Link to comment Share on other sites More sharing options...
