JSC Posted January 10, 2008 Report Share Posted January 10, 2008 Hi Guys Have checked as best I can for information on what glue to use to glue a Plastisol model down for making a POP mold. If discussed privously .. please excuse. Anyone give me a little help on this ? Thanx JSC Quote Link to comment Share on other sites More sharing options...
nova Posted January 10, 2008 Report Share Posted January 10, 2008 I simply use the cheapest super glue I can find. I get mine at the Dollar Store. 4 tubes fo a buck. www.novalures.com Quote Link to comment Share on other sites More sharing options...
JSC Posted January 10, 2008 Author Report Share Posted January 10, 2008 Thanx Nova for the Quick Reply. JSC Quote Link to comment Share on other sites More sharing options...
Richard Prager Posted January 10, 2008 Report Share Posted January 10, 2008 Someone mentioned a while back, mixing some super glue with gorilla glue. Works well! Quote Link to comment Share on other sites More sharing options...
MONKEYqpHUNTER Posted January 10, 2008 Report Share Posted January 10, 2008 fill the mold cavity till its over flowing keep pouring till the whole top of mold is covered let it set for a bit.peel out bait like normal trim off xtra plastic you should a square or close to a square.now moisten the back of the square stick it in the bottom of a tupperware bowl build a box around the square with legos 2-3 blocks high pour in pop let set take out of form now sand and seal wash legos and make another. pont no glue needed Quote Link to comment Share on other sites More sharing options...
JSC Posted January 11, 2008 Author Report Share Posted January 11, 2008 Great Help Guys Now I gotta go buy some leggos .... wait a' minute the Grand Kids have a box full out in the breeze way. You reckon I could get by using them ...... Thanx JSC Quote Link to comment Share on other sites More sharing options...
Vodkaman Posted January 11, 2008 Report Share Posted January 11, 2008 I would use some of rookies duct tape on the lego's. They can be a real pain to clean the plaster out if it gets inside. Quote Link to comment Share on other sites More sharing options...
JSC Posted January 11, 2008 Author Report Share Posted January 11, 2008 Man Duct tape will fix anything (for a while) Thanx JSC Quote Link to comment Share on other sites More sharing options...
MONKEYqpHUNTER Posted January 11, 2008 Report Share Posted January 11, 2008 if you still want to glue your master down try double side duct tape it works well but you can see the indent from it on the top of your mold this has no effect on the mold just not as pretty Quote Link to comment Share on other sites More sharing options...
