JSC Posted January 11, 2008 Report Share Posted January 11, 2008 Hi We had a little discussion in Plastics about modifing the Lee Plastic Pot .. It was mentioned that the Spout might have a weld to the pot. I find out the hard way with a Lead Pot. Had something "Hard" stuck in the pouring spout .. trid to drill it out .. broke the drill in it ... make a long story short I finaly suceeded in knocking the Spourt assembly off. It is not welded in .. it is pressed in. I when to Lee's website and ordered a new pot and spout assembly (8.00 plus 4.00 freight) attached is a picture of the pot and guts both old and new. This was my back up Lead pot. Thought this might be of intrest to some one. JSC Quote Link to comment Share on other sites More sharing options...
Basseducer Posted January 11, 2008 Report Share Posted January 11, 2008 JSC, Lee has a replacement program where you send them your old pot (in any condition) and half of the retail price for that pot and they will totally remanufature it and send it back with a two year warranty. TJ Quote Link to comment Share on other sites More sharing options...
JSC Posted January 11, 2008 Author Report Share Posted January 11, 2008 Thanx Bassducer that is good to know (would have saved me a pile of work .. getting everything lined up putting it back together is real "Goodie" Make sure you have at least one hand in a glove. I had to re work the "lifting" lever as the the hole that does not attache the sides was not the same). Live and learn. JSC Quote Link to comment Share on other sites More sharing options...
cadman Posted January 11, 2008 Report Share Posted January 11, 2008 Now that's what I like to see in a thread. Good old fashion know how on how to fix things. Also excellent info Basseducer. I hope I remember that when I have problems. Good info guys. Quote Link to comment Share on other sites More sharing options...
LedHed Posted January 11, 2008 Report Share Posted January 11, 2008 Very interesting post Thnx Quote Link to comment Share on other sites More sharing options...
