EugeneM Posted January 16, 2008 Report Share Posted January 16, 2008 My senkos are coming out with about half of the bait being hollow.I pour with Calhouns plastic.What am I doing wrong? Quote Link to comment Share on other sites More sharing options...
saint308 Posted January 16, 2008 Report Share Posted January 16, 2008 Half the bait? To me that means that you are hitting the opening and clogging the spout before it fills. If only the top inch or so is hollow then you are probably need to keep the resevoir filled until cool. As the plastic cools it contacts pulling in the plastic in the resevoir. You need to keep topping off the resevoir until cool. Hope this helps. Saint. Quote Link to comment Share on other sites More sharing options...
pastorshane Posted January 16, 2008 Report Share Posted January 16, 2008 Saint sounds dead on. Quote Link to comment Share on other sites More sharing options...
bassnfool Posted January 16, 2008 Report Share Posted January 16, 2008 Try getting your plastic a little hotter, pour using a smaller stream of plastic so you don't clog the spru hole. Quote Link to comment Share on other sites More sharing options...
EugeneM Posted January 16, 2008 Author Report Share Posted January 16, 2008 Ok guys I will try that this evening.Thanks for the help. Quote Link to comment Share on other sites More sharing options...
